Products

EXtronic Series


Explosion Proof Solenoid Metering Pump

The EXtronic® is the explosion proof solenoid pump series representing a proven technology for metering liquid media in hazardous areas classified in accordance with Class 1, Division 1.  The EXtronic® covers the capacity range from 0.05 to 15.9 gph (0.23 to 60 l/h) with pressures up to 363 psi (25 bar).

Benefits

  • Safe metering in hazardous/classified areas
  • Intrinsically safe contact or analog control
  • Turndown ratio 1200:1
  • Operationally safe for flammable liquids
  • No loss of prime with off-gassing liquids
  • Plug ‘n’ play systems solutions

Features

  • Capacities to 15.9 gph (60 lph)
  • Maximum pressure to 363 psi (25 bar)
  • Factory Mutual, CE and CSA Approved
  • Class 1, Division 1, Groups B, C, & D
  • Operation modes in manual, contact or analog
  • Solenoid driven diaphragm pump
  • Auto-degassing and high viscosity liquid ends
  • Pre-packaged systems available

Applications

  • Chemical process
  • Mining
  • Petrochemical
  • Heavy industrial
  • Pharmaceutical
  • Fine dust environments
  • Generally hazardous areas

Capacity Data

EXtronic®
Pump  Version Capacity at Maximum Backpressure Capacity at 1/2 Maximum Backpressure Pre-Primed Suction Lift Max. Stroking Rate Tubing Connectors**O.D. x l.D. Shipping Weight (higher weights are for SS)
psig (bar) GPH (L/h) mL/ stroke psig (bar) GPH (L/h) mL/ stroke ft. (m) spm inches lbs. (kg)
EXBb
1000 145 (10) 0.05 (0.23) 0.03 73 (5) 0.07 (0.3) 0.04 19.6 (6) 120 1/4 x 3/16 26.5-35.3 (12-16)
2501 363 (25) 0.26 (1.0) 0.15 290 (20) 0.29 (1.1) 0.17 19.6 (6) 120 1/4 x 3/16 39.7 (18)
1601 232 (16) 0.26 (1.0) 0.14 116 (8) 0.34 (1.3) 0.18 19.6 (6) 120 1/4 x 3/16 26.5-35.3 (12-16)
1201 174 (12) 0.45 (1.7) 0.23 87 (6) 0.53 (2.0) 0.28 19.6 (6) 120 1/4 x 3/16 26.5-35.3 (12-16)
2502 363 (25) 0.53 (2.0) 0.28 290 (20) 0.58 (2.2) 0.31 5.9 (1.8) 120 1/4 FNPT 28.7-37.5 (13-17)
1002 145 (10) 0.61 (2.3) 0.31 73 (5) 0.71 (2.7) 0.38 19.6 (6) 120 1/2 x 3/8 26.5-35.3 (12-16)
0803 116 (8) 0.98 (3.7) 0.51 58 (4) 1.03 (3.9) 0.54 19.6 (6) 120 1/4 x 3/16 26.5-35.3 (12-16)
2505 363 (25) 1.11 (4.2) 0.64 290 (20) 1.27 (4.8) 0.73 6.5 (2) 110 1/4 FNPT 35.3-44.1 (16-20)
1006 145 (10) 1.59 (6.0) 0.83 73 (5) 1.9 (7.2) 1 6.9 (2.1) 120 1/2 x 3/8 28.7-37.5 (13-17)
0308 44 (3) 2.27 (8.6) 1.2 22 (1.5) 2.72 (10.3) 1.43 9.8 (3) 120 1/2 x 3/8 26.5-35.3 (12-16)
1310 188 (13) 2.77 (10.5) 1.59 87 (6) 3.14 (11.9) 1.8 6.5 (2) 110 1/2 x 3/8 35.3-44.1 (16-20)
0613 87 (6) 3.46 (13.1) 1.82 44 (3) 3.94 (14.9) 2.07 8.8 (2.7) 120 1/2 x 3/8 28.7-37.5 (13-17)
0814 116 (8) 3.7 (14.0) 2.12 58 (4) 4.07 (15.4) 2.33 9.8 (3) 110 1/2 x 3/8 35.3-44.1 (16-20)
0417 51 (3.5) 4.6 (17.4) 2.42 29 (2) 4.73 (17.9) 2.49 6.5 (2) 120 1/2 x 3/8 28.7-37.5 (13-17)
0814 116 (8) 3.7 (14.0) 2.12 58 (4) 4.07 (15.4) 2.33 9.8 (3) 110 1/2 x 3/8 35.3-44.1 (16-20)
0430 51 (3.5) 7.13 (27.0) 4.09 29 (2) 7.79 (29.5) 4.47 9.8 (3) 110 DN 10 35.3-44.1 (16-20)
0260 22 (1.5) 15.85 (60.0) 9.09 - (-) - (-) - 8.2 (2.5) 110 DN 15 35.3-44.1 (16-20)

Above capacities and suction lift refer to pumps tested on water at 115 VAC, 60 Hz, and an ambient temperature of 70°F (20°C).
Higher specific gravity fluids will reduce suction lift. Higher viscosity fluids will reduce capacity.
Liquid ends for highly viscous media have 10-20% less metering capacity and are not self-priming. Standard connectors are 1/2” MNPT or 5/8” hose barb. Positive suction is recommended.
* High Viscosity models are available in the 1002, 1006, 1310 and 0814 models. Liquid end designation is PP4 (Polypropylene/EPDM) Suitable for viscosities to 3500 cps
** SS versions use 1/4” female threads except models 0220, 0420, and 0232 which use 3/8” female threads.

EXtronic® with Auto-degassing Liquid Ends
Pump  Version NS/PS Capacity at Maximum Backpressure Max. Stroking Rate Connectors Tube/NPT fitting PP/ NP/NS/PS/TT Suction  Lift Shipping Weight
  psig  (bar) GPH (L/h) mL/ stroke spm inches ft.     (m) Ibs. (kg)
EXBb                      
1601 232 (16) 0.17 (0.7) 0.09 120 1/4 x 3/16 5.9 (1.8) 27 (12)
1201 174 (12) 0.26 (1.0) 0.14 120 1/4 x 3/16 6.6 (2.0) 27 (12)
803 116 (8) 0.63 (2.4) 0.33 120 1/4 x 3/16 9.2 (2.8) 27 (12)
1002 145 (10) 0.48 (1.8) 0.25 120 1/4 x 3/16 6.6 (2.0) 27 (12)
Shipping Weight for EXBb Fireproof M Version is an additional 32 lbs. (14 kg).

Liquid end materials in contact with media

Version Liquid End Suction/Discharge valves Seals Valve balls Diaphragm*
PP1 Polypropylene Polypropylene EPDM Ceramic PTFE
PP4* Polypropylene Polypropylene EPDM Ceramic PTFE
NP1 Acrylic PVC Viton® Ceramic PTFE
NP3 Acrylic PVC Viton® Ceramic PTFE
NS3** Acrylic PVC Viton® Ceramic PTFE 
PS3** PVC PVC Viton® Ceramic PTFE
TT1 PTFE with carbon PTFE with carbon PTFE Ceramic PTFE
TTT PTFE with carbon PTFE with Carbon PTFE Ceramic PTFE
SS.. 316 Stainless steel 316 Stainless Steel PTFE Ceramic*** PTFE

* PP4 with Hastelloy C valve springs.
** NS3 and PS3 with Hastelloy C valve springs, PVDF valve core. NOTE: Viton® is a registered trademark of DuPont Dow Elastomers.
*** DN 10 and DN 15 valve balls are 316 stainless steel

Brochures

Cut Sheet: EXtronic | Part #: 7750259 | Updated: 10/17/13

Catalog Section

Catalog: Solenoid Driven Pumps Catalog Section | Part #: xxxxxx | Updated: 1/31/17

Manuals And Instructions

Manual: EXBb EC Declaration English | Part #: None | Updated: Unknown
Manual: EXBb FM Manual English | Part #: 985143 | Updated: 8/1/13
Manual: EXBb Manual English | Part #: 987094 | Updated: 8/1/06
Manual: Extronix Parts List | Part #: None | Updated: Unknown

Frequently Asked Questions

What are the primary advantages of a solenoid driven metering pump?

The pump drive has only one moving part, the armature shaft. Generally, the less moving parts, the more reliable the pump. Solenoid pumps are very good for low pressure applications and compensation for line voltage fluctuations are excellent.