Suggestions

Orlita Mh Series

0 - 211 gph (0 - 800 l/h) per pump head, max. pressure 58,000 psig (4,000 bar)

Particularly suitable for very high pressures. Exact adaptation of the pump to particular requirements because of modular design.

Product description

High Accuracy Metering

The ProMinent Orlita Mh is a hydraulically actuated metering pump capable of reaching pressures up to 43,500 psi (3000 bar) and flows up to 115 gph (430 l/h). A stainless-steel diaphragm seals the liquid end from the hydraulic chamber while a unique cone valve design in the suction and discharge valve guarantees optimum accuracy.

The hydraulic chamber is equipped with internal pressure relief along with an automatic vent valve. These features allow the Mh to operate at high conditions and many different applications.

Features and Benefits

  • In Accordance with API 675
  • Accuracy ±0.5 %
  • Multiplexing Available
  • Flow rates to 115 gph
  • Temperatures from -40 to 390 ˚F (-40 to 200 ˚C)
  • Unique cone valves
  • Stainless Steel diaphragm
  • Diaphragm rupture control
  • Operating Pressures to 43,500 psi
  • Special connections as requested
  • Heating or Cooling jackets

Field of application

The following list is a general representation of basically suitable applications for this product. Please contact your personal representative to discuss the use of the product in your individual application.

  • Glycol injection
  • Catalyst injection
  • Methanol injection
  • Molten Sulfur
  • LDPE Production
  • Drag Reducers

    Technical Details

    • MHS 35 – stroke length: 0-20 mm, rod force: 3500 N
    • MHS 600 – stroke length: 0-40 mm, rod force: 40,000 N
    • Stroke length adjustment range: 0 – 100% in operation and idle.
    • Stroke length adjustment: manually using manual adjustment wheel and scaled display (optionally with electric actuator or control drive).
    • Metering reproducibility is better than ± 1% within the 10 – 100 % stroke length range under defined conditions and with proper installation (API 675).
    • Metal diaphragm with diaphragm rupture monitoring system
    • Integrated hydraulic relief and bleed valve
    • Wetted materials: Stainless steel, special designs are available on request
    • A wide range of power end versions is available: Three-phase standard AC motors, motors for use in areas at risk from explosion and different flange designs for use in customer-specific motors
    • Degree of protection: IP 55
    • Temperature range - 60 °C to + 200 °C
    • Design in compliance with API 675 among others

    Technical data for ORLITA MhS 35 single-head pump 50 Hz

    Plunger Ø

    Theor. stroke volume

    Max. capacity (theo.) in gph | l/h at strokes/min (50 Hz)

    Max. pressure

    Standard type of valve

    36

    45

    73

    91

    112

    145

    207

    inch

    ml/stroke

    gph | l/h

    gph | l/h

    gph | l/h

    gph | l/h

    gph | l/h

    gph | l/h

    gph | l/h

    psi

    * 0.49 inches stroke length

    0.12 *

    0.11

    0.05 | 0.2

    0.08 | 0.3

    0.13 | 0.5

    0.16 | 0.6

    0.18 | 0.7

    0.24 | 0.9

    0.34 | 1.3

    5,802

    1/16"

    0.2 *

    0.29

    0.16 | 0.6

    0.21 | 0.8

    0.34 | 1.3

    0.42 | 1.6

    0.53 | 2.0

    0.69 | 2.6

    0.98 | 3.7

    5,802

    1/16"

    0.24 *

    0.42

    0.24 | 0.9

    0.32 | 1.2

    0.48 | 1.8

    0.61 | 2.3

    0.74 | 2.8

    0.98 | 3.7

    1.4 | 5.3

    5,802

    1/16"

    0.28

    0.77

    0.45 | 1.7

    0.55 | 2.1

    0.87 | 3.3

    1.11 | 4.2

    1.37 | 5.2

    1.77 | 6.7

    2.54 | 9.6

    13,054

    0.31

    1.01

    0.58 | 2.2

    0.71 | 2.7

    1.16 | 4.4

    1.45 | 5.5

    1.77 | 6.7

    2.3 | 8.7

    3.3 | 12.5

    9,138

    1/16"

    0.39

    1.57

    0.9 | 3.4

    1.14 | 4.3

    1.8 | 6.8

    2.25 | 8.5

    2.77 | 10.5

    3.62 | 13.7

    5.15 | 19.5

    6,469

    1/8"

    0.63

    4.02

    2.3 | 8.7

    2.88 | 10.9

    4.62 | 17.5

    5.79 | 21.9

    7.11 | 26.9

    9.25 | 35.0

    13.21 | 50.0

    2,524

    1/8"

    0.79 *

    4.71

    2.69 | 10.2

    3.38 | 12.8

    5.42 | 20.5

    6.76 | 25.6

    8.32 | 31.5

    10.83 | 41.0

    15.48 | 58.6

    1,160

    1/8"

    0.98

    9.82

    5.65 | 21.4

    7.05 | 26.7

    11.28 | 42.7

    14.11 | 53.4

    17.36 | 65.7

    22.56 | 85.4

    32.23 | 122.0

    1,030

    1/4"

    1.77

    31.81

    18.28 | 69.2

    22.85 | 86.5

    36.57 | 138.4

    45.71 | 173.0

    56.25 | 212.9

    73.1 | 276.7

    104.44 | 395.3

    319

    1/2"

    Technical data for ORLITA MhS 600 single-head pump 50 Hz

    Plunger Ø

    Theor. stroke volume

    Max. capacity (theo.) in gph | l/h at strokes/min (50 Hz)

    Max. pressure

    Standard type of valve

    65

    76

    105

    121

    139

    166

    192

    inch

    ml/stroke

    gph | l/h

    gph | l/h

    gph | l/h

    gph | l/h

    gph | l/h

    gph | l/h

    gph | l/h

    psi

    1.02

    21.24

    21.93 | 83

    25.63 | 97

    35.14 | 133

    40.69 | 154

    46.76 | 177

    56.01 | 212

    64.73 | 245

    10,922

    1/8"

    1.1

    24.63

    25.36 | 96

    29.85 | 113

    40.95 | 155

    47.29 | 179

    54.43 | 206

    64.99 | 246

    75.03 | 284

    9,428

    1/4"

    1.14

    26.42

    27.21 | 103

    31.97 | 121

    43.86 | 166

    50.73 | 192

    58.39 | 221

    69.75 | 264

    80.58 | 305

    8,789

    1/2"

    Note

    All performance data applies to 50 Hz. If a 60 Hz motor is used, the performance will be correspondingly higher.

    Important note:

    Abridged presentation of our complete product range. Other types on request

    Downloads for Orlita Mh Series

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    High Accuracy Metering

    The ProMinent Orlita Mh is a hydraulically actuated metering pump capable of reaching pressures up to 43,500 psi (3000 bar) and flows up to 115 gph (430 l/h). A stainless-steel diaphragm seals the liquid end from the hydraulic chamber while a unique cone valve design in the suction and discharge valve guarantees optimum accuracy.

    The hydraulic chamber is equipped with internal pressure relief along with an automatic vent valve. These features allow the Mh to operate at high conditions and many different applications.

    Features and Benefits

    • In Accordance with API 675
    • Accuracy ±0.5 %
    • Multiplexing Available
    • Flow rates to 115 gph
    • Temperatures from -40 to 390 ˚F (-40 to 200 ˚C)
    • Unique cone valves
    • Stainless Steel diaphragm
    • Diaphragm rupture control
    • Operating Pressures to 43,500 psi
    • Special connections as requested
    • Heating or Cooling jackets

    Application

    Technical Data

    Downloads

    Find local ProMinent representative

    Contact us

    »We are looking forward to your enquiry.«

    +1 412-787-2484