Products

Concept PLUS Series


Quality, reliability and the best value!

The ProMinent ® Concept Plus series covers a capacity range of 0.19 to 4.33 GPH (0.7 to 14.9 LPH) at pressures up to 232 psi (16 bar).
Its compact construction and features make it ideal for use in flow proportional or on/off control applications. The Concept Plus mounts easily onto a tank or wall bracket.

Benefits

  • NSF 61/50 approved (NSF/61 - acrylic or PVDF liquid ends, NSF 50 applies only to NPB0 & NPB2 liquid end versions)
  • Low cost opens up opportunities in the most basic applications
  • PVDF wetted ends eliminate compatibility concerns
  • Integral bleed valve prevents “loss of prime”
  • Lowest maintenance costs in its class

Features

  • Adjustment of the pump capacity is via the stroke length in the range of 10-100 % or can be set at 1 of the 4 stroke frequency settings
  • This gives an adjustment ratio of 40:1.
  • External control via dry contact pulse (1:1)
  • PVDF Liquid ends are ideal for standardization.
  • Wetted end materials: PP. Acrylic/PVC or PVDF

Applications

  • Cooling towers
  • Metal finishing
  • Chlorination
  • Boiler feed applications
  • General Chlorination
  • Municipal and industrial wastewater
  • Water disinfection
  • Biocide feed
  • “Pump on a drum” applications

Capacity Data

Pump Version Capacity at Maximum Back Pressure mL/ stroke Max. Stroking Rate Pre-Primed Suction Lift Tubing Connectors O.D. x I.D. Shipping Weight (approx.)
psig (bar) GPH (L/h) spm ft. (m) (in.) lbs. (kg)
1000 145 (10) 0.19 (0.7) 0.07 180 20 (6) 1/4” x 3/16” 3.97 (1.8)
1601 232 (16) 0.29 (1.1) 0.10 240 20 (6) 1/4” x 3/16” 3.97 (1.8)
1002 145 (10) 0.55 (2.1) 0.19 180 16 (5) 1/4” x 3/16” 3.97 (1.8)
1003 145 (10) 0.79 (3.0) 0.19 240 16 (5) 1/4” x 3/16” 3.97 (1.8)
0704 102 (7) 1.03 (4.0) 0.41 180 13 (4) 1/4” x 3/16” 3.97 (1.8)
0705 102 (7) 1.37 (5.2) 0.38 240 13 (4) 1/4” x 3/16” 3.97 (1.8)
0308 44 (3) 2.38 (9.0) 0.79 180 20 (6) 3/8” x 1/4” 3.97 (1.8)
0215 22 (1.5) 4.33 (16.4) 1.40 180 5 (1.5) 3/8” x 1/4” 3.97 (1.8)
External pulse contact retrofit available as an option (P/N 1022000)

Brochures

Cut Sheet: Concept Plus | Part #: 7750012 | Updated: 11/11/16

Catalog Section

Catalog: Solenoid Driven Pumps Catalog Section | Part #: xxxxxx | Updated: 1/31/17

Instructional Videos

Video: Pump Accessories (WEBINAR) | Part #: xxxxxx | Updated: 1/10/14

Manuals And Instructions

Manual: Con Plus Changing Diaphragm | Part #: None | Updated: n/a
Manual: Con Plus External Control Kit | Part #: 1022099 | Updated: 9/1/03
Manual: CONCEPTplus CNPb | Part #: 984976 | Updated: 1/2/16

Frequently Asked Questions

Standard Lead Times for Products / Expediting

Standard lead times are listed below. If you need an order expedited, please contact your customer service representative. Please be aware that overnight shipments receive priority over ground shipments. Gala/Beta/Concept - 3 days Sigma series - 5 days ProMus - 2 weeks Dulcometer 3-4 days

What are the primary advantages of a solenoid driven metering pump?

The pump drive has only one moving part, the armature shaft. Generally, the less moving parts, the more reliable the pump. Solenoid pumps are very good for low pressure applications and compensation for line voltage fluctuations are excellent.

When discharging to atmosphere, what steps will improve repeatability of dosing?

Installing a spring in the discharge valve of the pump gives some improvement, but for the maximum improvement, a backpressure valve should be installed at the end of the line.