gamma/ L Diaphragm Metering Pump

The gamma/ L is the world's first calibrateable pump of its performance class. The metered quantity is directly displayed in L/h. The large illuminated LC display makes sure that all displayed variables are simple to read. The integrated 2-week Process-Timer (optional) offers an extremely wide range of application possibilities.

Advantages

No metering errors: direct clear text settings and feed rate monitoring.
Cost and space-savings thanks to integrated 2-week process timer. The intelligent alternative to the time switch.
Easy-to-read values thanks to the large backlit LC display – even in tricky viewing conditions.
Problem-free connection to interface complex process feed systems with optional PROFIBUS®-DP
interface.
Level monitoring of the chemicals via an input for a two-stage float-type level switch with early warning function

Application Areas

Highly automated processes in nearly all industries
Cooling water circulations: metering of biocides, corrosion inhibitors, defoamers and other additives
Chemical industries

Features

Capacity range 0.19 - 8.4 gph (0.74 - 32 L/h), 232 - 29 psig (16 - 2 bar)
Continuous stroke length adjustment from 0 - 100 %
Digitally accurate stroking rate via keypad and large LC display
Feed rate display in strokes/min. or gph (L/h)
Programmable pressure levels
3-LED-Display for on/off, warning, and error
Liquid end materials: PP, Acrylic/PVC, PVDF, PTFE, stainless steel
Patented coarse/fine bleeding on PP, Acrylic/PVC and PVDF
Self-bleeding liquid end version in PP and Acrylic/PVC
HV liquid end for highly viscous media
Metering monitor input, adjustable error stroke counter
External control via voltage free contact with optional increase/decrease pulse function
Optional external control via standard signal 0/4 - 20 mA
Two level float switch connector
Optional 14 day process timer
Protection class IP65
Low Voltage 12-24 V DC, 24 V AC/DC Option
Optional concentration entry for proportional flow metering
Interface for PROFIBUS®-DP

Material Options for Liquid Ends

Polypropylene: The low-cost alternative, resistant to many acids and alkaline solutions. This material is typically used in water treatment applications.
Acrylic Glass: Offers outstanding resistance to chlorine bleaching solutions and is a transparent liquid end material. This offers the advantage to observe the pumping process in the liquid end. Air inclusions or crystalline deposits that may interrupt the metering process can be detected and removed.
PVDF: Resistant to concentrated or oxidizing acids and alkaline solutions. A less expensive alternative to PTFE.
PTFE: Best suited to meter highly concentrated or oxidizing acids and alkaline solutions
Stainless Steel: For metering solvents and liquids containing oil

For gas-emitting media self-bleeding liquid end versions are available in polypropylene and acrylic glass.

Technical Data

pump type gamma/ L	psig	bar	gph	L/h	strokes/min	Suction lift mWG	Connector Dimensions outer Ø × inner Ø in.	Connector Dimensions outer Ø × inner Ø mm
GALa 1000	145	10	0.19	0.74	180	6	1/4 x 3/16	6 x 4
GALa 1601	232	16	0.29	1.1	180	6	1/4 x 3/16	6 x 4
GALa 1602	232	16	0.55	2.1	180	6	1/4 x 3/16	6 x 4
GALa 1005	145	10	1.1	4.4	180	6	1/2 x 3/8	8 x 5
GALa 0708	102	102	1.9	7.1	180	6	1/2 x 3/8	8 x 5
GALa 0413	58	4	3.2	12.3	180	3	1/2 x 3/8	8 x 5
GALa 0220	29	2	5.0	19.0	180	2	1/2 x 3/8	8 x 5

GALa 1605	232	16	1.1	4.4	180	6	1/2 x 3/8	8 x 5
GALa 1008	145	10	1.8	6.8	180	6	1/2 x 3/8	8 x 5
GALa 0713	102	7	2.9	11.0	180	4	1/2 x 3/8	8 x 5
GALa 0420	58	4	4.5	17.1	180	3	1/2 x 3/8	8 x 5
GALa 0232	29	2	8.4	32.0	180	2	1/2 x 3/8	8 x 5

gamma/ L metering pumps with self-bleeding liquid end

pump type gamma/ L	psig	bar	gph	L/h	strokes/min.	Suction lift mWG	Connector Dimensions outer Ø × inner Ø in.	Connector Dimensions outer Ø × inner Ø mm
GALa 1601	232	16	0.16	0.59	180	1.8	1/4 x 3/16	6 x 4
GALa 1602	232	16	0.37	1.4	180	2.1	1/4 x 3/16	6 x 4
GALa 1005	145	10	0.95	3.6	180	2.7	1/2 x 3/8	8 x 5
GALa 0708	102	7	1.74	6.6	180	2.0	1/2 x 3/8	8 x 5
GALa 0413	58	4	2.8	10.8	180	2.0	1/2 x 3/8	8 x 5
GALa 0220	29	2	4.3	16.2	180	2.0	1/2 x 3/8	8 x 5

GALa 1605	232	16	0.87	3.3	180	3.0	1/2 x 3/8	8 x 5
GALa 1008	145	10	1.66	6.3	180	3.0	1/2 x 3/8	8 x 5
GALa 0713	102	7	2.77	10.5	180	2.5	1/2 x 3/8	8 x 5
GALa 0420	58	4	4.12	15.6	180	2.5	1/2 x 3/8	8 x 5

Materials on each model in contact with chemicals

	Liquid end	Suction/Discharge Connector	Seals	Balls
PPE	Polypropylene	Polypropylene	EPDM	ceramic
PPB	Polypropylene	Polypropylene	FPM*	ceramic
PVT	PVDF	PVDF	PTFE	ceramic
NPE	acrylic (PMMA)	PVC	EPDM	ceramic
NPB	acrylic (PMMA)	PVC	FPM*	ceramic
TTT	PTFE with carbon	PTFE with carbon	PTFE	ceramic
SST	Stainless steel	Stainless steel	PTFE	ceramic