Suggestions

Potable Water Supply

Water is the most valuable resource on earth...

…and it should be treated as such. ProMinent specialises in reliable solutions for water treatment and disinfection that effectively eliminate bacteria, viruses and harmful substances.

Requirements - Potable Water Supply

 

Zero compromise

Good potable water is clear, odour- and taste-neutral, and not too high in mineral salts. It must also meet very high standards of hygiene. ProMinent offers a full range of technologies for disinfection, oxidation, membrane filtration In water treatment, membrane filtration is the process for removing particles and salts in the water ... more in the glossary and desalination. With these technologies, it's possible to achieve very high quality potable water in accordance with global WHO standards.

From Madeira to Thailand

Water needs to be processed differently depending on its origin and how dirty it is. ProMinent has the right cleaning process for every requirement. This is the only way to ensure the best possible quality - anywhere in the world. Whether it's table water in Madeira, potable water for a Swiss town or an immediate water supply for flood victims in Thailand, ProMinent products and mature complete solutions provide potable water of a reliable high standard. Thanks to built-in measuring and control technology, the quality of the water in the treatment systems can be monitored immediately and in situ. This offers the benefits of high operational reliability and low costs for the operator.

Experience plus expertise = excellent advice

ProMinent has products to cover almost every process used to treat and disinfect potable water. Our systems, including their components, are all manufactured in house and can be preassembled ready for operation or individually configured. Your operating costs stay low while your processes remain lean and efficient. You benefit all along the line from the expertise of our engineers and technicians, from planning and engineering to maintenance and training.

Downloads for Potable Water Supply

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by Document type
Load more matches ...
No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

 

Zero compromise

Good potable water is clear, odour- and taste-neutral, and not too high in mineral salts. It must also meet very high standards of hygiene. ProMinent offers a full range of technologies for disinfection, oxidation, membrane filtration In water treatment, membrane filtration is the process for removing particles and salts in the water ... more in the glossary and desalination. With these technologies, it's possible to achieve very high quality potable water in accordance with global WHO standards.

From Madeira to Thailand

Water needs to be processed differently depending on its origin and how dirty it is. ProMinent has the right cleaning process for every requirement. This is the only way to ensure the best possible quality - anywhere in the world. Whether it's table water in Madeira, potable water for a Swiss town or an immediate water supply for flood victims in Thailand, ProMinent products and mature complete solutions provide potable water of a reliable high standard. Thanks to built-in measuring and control technology, the quality of the water in the treatment systems can be monitored immediately and in situ. This offers the benefits of high operational reliability and low costs for the operator.

Experience plus expertise = excellent advice

ProMinent has products to cover almost every process used to treat and disinfect potable water. Our systems, including their components, are all manufactured in house and can be preassembled ready for operation or individually configured. Your operating costs stay low while your processes remain lean and efficient. You benefit all along the line from the expertise of our engineers and technicians, from planning and engineering to maintenance and training.

Downloads

Suitable products - Potable Water Supply

The ProMinent beta is a microprocessor-based diaphragm solenoid metering pump capable of flows from 0.16 to 8.45 gph (0.59 to 32 l/h) and pressures to 363 psi (25 bar).

more

The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eXcellent ingenuity! With integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X is ideal for all metering work involving liquid media.

more

The gamma/ XL is a smart, connectible solenoid-driven metering pump that is setting new standards in terms of productivity, reliability and cost-effectiveness.

more

The DULCOFLOW flow meter measures all liquid media. The amount of liquid which has passed through in pulsing flow regimes are measured.

more

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

more

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

more

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

The ProMinent Makro TZMb is a mechanically or hydraulically actuated motor driven diaphragm metering pump. The stroke length can be adjusted by means of the shift ring mechanism from 0-0.4 in (TZMb), with 0.5 % accuracy. The 5-speed gearbox is encased in a cast, seawater resistant, acrylic resin lacquered housing.

more

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering of environmentally-hazardous substances.

more

The metering and emptying station DULCODOS SAFE-IBC provides your process with chemicals interruption-free. The system conforms to chemical compatibility requirements for a safe and innovative solution for storage and injection.

more

Polymer preparation station ULTROMAT ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

more

The metering system ULTROMAT ULPa (oscillating system) is ideal for batching flocculation aids for the preparation of a ready-to-use polymer solution.

more

The ProMinent metering system ULTROMAT ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation aids.

more

The metering system PolyRex is a double-decker batching station for the processing of liquid and powdered polymers. It consists of the feed and mixer unit and the two stainless steel double-decker tanks. The polymers used are ideally utilised.

more

Manual polymer batching station ULTROMAT MT: Perfect metering system for the processing of small quantities of liquid and powdered polymers: extremely robust and cost-effective.

more

Turbidity measurements with DULCOTEST DULCO turb C: Compact measuring instrument that uses light scatter to measure turbidity, with a large measuring range and different designs to comply with ISO and EPA standards. Available with or without automatic cleaning.

more

Compact 2-wire-transmitter with microprocessor technology. Reliable monitoring for pH, Redox, Chlorine, conductive conductivity, and temperature applications.

more

Ultrafiltration system DULCOCLEAN UF reliably and safely uses membrane technology to remove turbidity, particles and microbiological contamination.

more

Reverse osmosis system DULCOSMOSE BW is the standard model for the modern desalination of brackish water. Equipped with the latest generation of "high rejection low-pressure" membranes, this system achieves maximum permeate output with moderate operating pressures, thereby lowering investment and operating costs.

more

The reverse osmosis system DULCOSMOSE SW is the standard model for modern desalination of salt water. Equipped with the latest generation of "high rejection low-pressure" membranes, this system achieves maximum permeate output with moderate operating pressures, thereby lowering investment and operating costs.

more

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

more

Chlorine dioxide measurement with DULCOTEST sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.

more

Chlorite measurements with DULCOTEST sensors in disinfection processes involving chlorine dioxide – high process reliability guaranteed.

more

Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

more

Widely used sensor for the measurement of oxygen dissolved in water above 0.1 ppm to oxygen saturation. For installation in standard immersion pipes or in the bypass line of the process flow. Use in aeration tanks of clarification plants, waterworks, in fish breeding or to monitor surface water. Minimal maintenance due to visual measuring principle.

more

Accurate measurement of fluoride with DULCOTEST sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

more

The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

more

Hydrogen peroxide measurement with DULCOTEST sensors: Efficient and reliable determination of the concentration of hydrogen peroxide - can be used in a wide range of applications.

more

ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

more

Measuring ozone in oxidation and disinfection applications: DULCOTEST sensors offer precise, reliable, application-specific measured values in real time.

more

pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

more

Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

more

The unique UV systems DULCODES LP are synonymous with pioneering water treatment – efficient and free of chemicals.

more

UV system DULCODES LP for drinking water disinfection, comprehensively certified to internationally-recognised DVGW/ÖVGW/SVGW/UVDGM standards. Looking to the future, the systems have already been type-tested in accordance with the latest DIN 19294-1:2020-08 test regulation. Successful certification officially confirms the precise 50-100% control range of the highly efficient VARIO-Flux lamps with dynamic lamp heating.

more

OZONFILT OZVb is powerful and compact and is ideal for efficient ozone generation from compressed air in the output range of up to 0.15 lb/h. The turnkey ozone system including mixing equipment offers everything you need for safe and seamless operation.

more

OZONFILT OZMa is synonymous with maximum operational safety and minimal operating costs. The ozone generator is maintenance-free and generates up to 0.93 lb/h (420 g/h) of ozone from compressed air.

more

Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon CDLb produces ClO2 discontinuously using the acid/chlorite process with diluted chemicals.

more

Chlorine dioxide system, which continuously produces ClO2 according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.

more

Chlorine dioxide system for the metering of chlorine dioxide with diluted starting chemicals. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDVd can be easily and safely integrated into any water treatment process.

more

Chlorine dioxide system for the metering of chlorine dioxide with concentrated starting chemicals. The proven safety concept protects people and the environment. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDKd can be easily and safely integrated into any water treatment process.

more

CHLORINSITU IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from salt and electricity. Key advantages are its simple process management and excellent system safety through integrated ventilation and bleeding.

more

Ultra-pure or low-chloride and low-chlorate sodium hypochlorite requires specialist plant engineering. The electrolysis system CHLORINSITU III is the solution for you.

more

Generation of sodium hypochlorite solution for smaller swimming pools and pools.

more

Produce high-purity chlorine gas in a vacuum process. Cost-effective, robust and compact.

more

Electrolysis systems of type CHLORINSITU V take the place of the chlorine gas system in the swimming pool and only need salt, water and electricity to do so.

more

Electrolysis systems of type CHLORINSITU V Plus generate ultra-pure chlorine gas directly on site and only need salt, water and electricity to do so. Peaks in demand can be covered by this system (Plus system). They are especially well suited to systems for disinfecting potable water, waste water, process water and water in swimming pools and cooling towers.

more

As a nanofiltration system, the DULCOSMOSE NF, a compact and value-for-money unit, can handle partial desalination in industrial applications. Maximum permeate output at low operating pressures ensures low operating costs thanks to the "ultra low pressure" diaphragm.

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

Continuous on-line measurement of ammonia using pH appropriate sensor technology. Uses specific sensor adapted to operational pH range to ensure correct measurement. Determine free ammonia, total ammonia, and NH3-N for control and reporting purposes.

more

The DULCOLEVEL is an easy-to-use radar sensor that provides continuous, accurate and reliable measurements of chemical levels within tanks, containers or IBC totes.

more

With DULCONNEX API, you can access your data on request from the DULCONNEX Cloud. Use this for integration into existing process control systems, SCADA, mobile or online apps as well as MES or share data with other digital solutions.

more

The DULCONNEX Inventory Management add-on is an extension to the DULCONNEX Platform. It can be used to monitor tank levels and inventory levels of chemicals at various sites regardless of your location. Tank level monitoring is based on the data of the DULCOLEVEL radar level sensor.

more

DULCOZON OZLa is an ozone generator with low life cycle costs. It combines a high ozone concentration with unbeatable efficiency.

more

High pump capacities are not a problem with the peristaltic pump DULCOFLEX DFC. It is equipped with extra rollers and fabric-reinforced hoses for industrial use.

more

The peristaltic pump DFD is designed for maximum pump capacities and high pressures and is winning customers over with its noiselessness and long service life. It is fitted with shoes and fabric-reinforced hoses – perfect for industrial use.

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

Enhance your wastewater management with the ProMix™ Polymer Blending System. Engineered for efficiency, ProMix™ optimizes polymer use, thus reducing chemical costs and process times. Its unique three-chamber design ensures effective activation without damaging the polymer chains, offering you superior performance in settling solids out of liquids. Easy integration, coupled with robust support and customization options, makes ProMix™ the smart choice for your operational needs.Discover the difference with ProMix™ S — Quality solutions for your application.

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

Find local ProMinent representative

Contact us

»We are looking forward to your enquiry.«

+1 412-787-2484 

References - Potable Water Supply

News and Events