Controller DULCOMETER diaLog DACb

Suggestions

Products

Product description

Intelligent measuring and controlling

The controller DULCOMETER diaLog DACb is our compact all-rounder for water analysis. With its specially designed functionalities, e.g. processing of interference variables and switchover of control parameters, it closes the control circuit between DULCOTEST sensors and ProMinent metering pumps. The measuring and control channels of the DULCOMETER diaLog DACb can be individually configured to meet customer requirements. Everything that you need for the reliable treatment of industrial and process water, drinking water as well as swimming pool water.

Features and Benefits

One, two or three channels
2-way PID control
Data and event logging with SD Card (optional)
Three analog outputs
Seven digital inputs
Four frequency outputs
Two powered relays
Measured value trend display
pH compensation for Free Chlorine
Temperature compensation for pH, conductivity, and fluoride
NEMA 4X enclosure
LAN/ Ethernet connectivity
PROFIBUS^® DP, Profinet and Modbus RTU
Optional 24V DC power

The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

Setting up a new DACa Controller
The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

DT Handheld Photometer for Calibration of Sensors

Field of application

The following list is a general representation of basically suitable applications for this product. Please contact your personal representative to discuss the use of the product in your individual application.

Potable water and sewage treatment
Wastewater treatment
Industrial and process water treatment
Swimming pool water treatment

Waste Water Treatment for electroplating

A clean affair: waste water cleaned in an environmentally-friendly manner

When it comes to thorough waste water treatment, we provide not just pumps, sensors and controllers, but also our comprehensive expertise in water treatment for electroplating.

Waste Water Treatment in the Paper and Pulp Industry

Clean waste water is returned to nature

Very low-impact treatment for waste water. Our intelligent processes efficiently clean and save money too.

Cooling Water Treatment in Energy Generation

No biofilm, no bacteria, no dangerous by-products

ProMinent metering pumps allow you to keep your cool at all times as you no longer need to concern yourself with the cooling process. Alternative biocides reliably prevent deposits.

Waste Water Treatment in Energy Generation

Treating waste water quickly and thoroughly

The benefits of our waste water treatment for energy generators can be easily summed up: our waste water treatment is thorough, environmentally-sound, economical and fully automatic. Because ProMinent thinks things through.

Improved water quality in public swimming pools through the use of UV and ozone

Efficient reduction of combined chlorine with modern systems.

Modern UV or ozone systems minimise the by-products resulting from chlorine disinfection. What's more, they are easy to install, improve water quality and cut operating costs significantly.

Flocculation in Public Swimming Pools

Metering flocculants delivers optimum filtration

Flocculants allow the smallest of particles to be removed from the swimming pool water. In turn, our high-precision solenoid metering pumps enable the precise and continuous supply of small volumes of these flocculants.

Chlorine Disinfection

Various procedures are used to disinfect swimming pool water. Alongside the conventional metering of chlorine, use of cost-effective and environmentally-friendly electrolysis systems is also worthwhile for private pools.

Metering Flocculants delivers Optimum Filtration

Internal Water Management in Hotels and Resorts

The best water for your kitchens and laundry

Fresh bedding and sweet-smelling towels in rooms, spotlessly clean dishes and fine dining in the restaurant – desalinated and germ-free water is absolutely essential. You have the staff, we have the system technology.

Fighting Legionella in Hotels and Resorts

Squeezing out legionella and pathogens

It can be disastrous for any hotel if guests come down with legionella and seek claims for damages from the company. ProMinent provides effective solutions for eliminating legionella and other pathogens in the long term.

Swimming Pool Water Treatment in Hotels and Resorts

Absolutely essential: an attractive pool with crystal-clear water

You are an expert in pampering your guests, young and old, with everything they could desire. This usually includes an attractive swimming pool or even a luxurious spa. This is where one of our core skills come in.

Potable Water Supply in Hotels and Resorts

Only the best for your guests: clean potable water around the clock

Clean potable water is a basic requirement for guest satisfaction and therefore commercial success. ProMinent's treatment systems enable you to provide outstanding quality water all year round.

(Pre-)Oxidation of Potable Water

(Pre-)oxidation binds harmful substances in potable water

(Pre-)oxidation improves water quality by eliminating many harmful substances and improving appearance, odour and taste. No one wants to drink brown water.

(Sand) Filtration for Potable Water

Filtration removes solids from the water

Unwanted particles and turbidity are removed from the water by sand or membrane filtration. An even more effective process is to filter using upstream flocculation or precipitation. Added substances allow smaller particles to become larger, so dissolved substances can flocculate.

Desalination of Seawater and Brackish Water

Obtaining additional potable water with desalination

Drinkable water is scarce. Only a fraction of all the world's water can be consumed. So the ability to treat brackish water and seawater is of interest to many countries and islands.

Stabilisation of Potable Water

Stabilisation makes water ready for transport

After the water has been treated, its quality should not change. Stabilisation maintains the quality of the water during distribution and use.

Cleaning fruit and vegetables

Simple and reliable cleaning process for agricultural products

Fresh fruit and veg are an essential part of our diet. So it's very important for them to reach the consumer in a safe condition. Precise metering of chlorine dioxide ensures that this is the case.

Fish processing, fish and shrimp farming

Successful farming and hygienic processing

More and more people are enjoying delicacies from our seas. Fish farms and also the fish processing industry therefore face the huge challenge of producing goods quickly and hygienically. Disinfected water is essential to both industries.

Large bakeries

Baking with reproducible quality

A large share of the bakery products we consume today are manufactured by machine. Producing goods that taste just right requires precise metering of the individual ingredients.

Production of whey and cheese

Perfect water for the entire production process

To guarantee an end product fit for purpose, ProMinent ensures optimum water quality at every stage of production, thereby reliably complying with statutory hygiene standards.

Intelligent recycling of backwash water in swimming pools

Reducing the need for fresh water, reducing the operational costs

In accordance with DIN 19645, backwash water can be treated in public swimming pools. To this end, ProMinent has developed a standardised procedure which can be easily adapted to any customer requirements, thanks to its modular construction.

Waste Water Treatment

Very low-impact treatment for waste water

Our water treatment technology delivers thorough yet environmentally friendly waste water treatment. What's more, with precisely metered additives and optimised processes, you also save money.

Swimming Pool Water Treatment

Modern water treatment and disinfection processes enhance swimming enjoyment

The use of metering technology and water treatment solutions may vary considerably depending on the industry and application. Rely on our decades of experience and know-how to find the safest and most efficient solution for you.

Potable Water Treatment

Outstanding water quality in line with global WHO standards

ProMinent turns water into hygienically perfect potable water – with powerful systems and components, which can be ready mounted for operation or individually configured.

Monitoring and Replenishing of Electroplating Baths

Demanding baths require concentration

Baths have to be monitored and replenished continually. This requires high concentration - from the sensors, controllers and pumps. Yet only small amounts of precisely fed chemicals are needed.

Disinfection of Potable Water

Germ-free potable water thanks to disinfection

As an essential nutrient, water must satisfy very strict quality controls. ProMinent offers sophisticated disinfection technology that reliably removes viruses, bacteria and microorganisms.

Measured variables: pH, ORP, chlorine, chlorine dioxide, chlorite, bromine, conductivity, peracetic acid, hydrogen peroxide, ozone, dissolved oxygen and fluoride
Installation, degree of protection: Combination housing (wall mounting, control panel mounting, pillar assembly) IP 67 and IP 66
Control: three measuring and control channels, each with independent monodirectional PID controller (optional: two bidirectional PID controllers)
24 V DC protective low voltage supply e.g. by means of solar system or in the wet area of waterworks
Temperature compensation for pH and for chlorine dioxide process sensor CDP, pH compensation for chlorine
Digital inputs for the processing of control signals, e.g. of sample water limit contacts, remote stop control and to monitor the liquid levels in chemical storage tanks
Control outputs for electronically controlled metering pumps and solenoid valves
Interference variable processing: simple control of water parameters in flowing water by processing the flow in the control algorithm
Adaptation of the controller setpoint to changed process conditions is possible via remote control by means of the mA signal of a PLC or with more stringent requirements via the field bus option

Technical Data


Measured variables and measuring ranges	Connection type mV: pH: 0.00 ... 14.00 ORP potential: -1,500 ... +1,500 mV Type of connection mA (amperometric measured variables, measuring ranges corresponding to sensors): Chlorine Chlorine dioxide Chlorite Bromine Ozone Hydrogen peroxide (PER 1 and PEROX H-3E) Hydrogen peroxide (PEROX H2.10 P with PEROX transducer V2 order. no. 1047979) Peracetic acid Dissolved oxygen Type of connection mA (potentiometic measured variables, measuring ranges corresponding to transmitters): pH ORP potential Fluoride: via module VA and function upgrade package 3 and 4 Conductivity mA via sensor CCT 1-mA-20 mS/cm Temperature: via Pt 100/Pt 1000, measuring range 32 … 302 °F (0 … 150 °C)
Resolution	pH: 0.01 ORP voltage: 1 mV temperature: 0.2 °F (0.1 °C) amperometric analysis (chlorine etc.): 0.001/0.01 ppm, 0.01 vol.%, 0.1 vol.%
Accuracy	0.3% based on the full-scale reading
Measurement input	pH/ORP (input resistance > 0.5 x 10¹² Ω)
Temperature compensation	Pt 100/Pt 1000 for pH, chlorine dioxide (CDP) sensor and fluoride
Correction range temp.	32…212 °F (0…100 °C)
pH compensation range for chlorine	Sensor CLE 3 and CLE 3.1: 6.5 ... 8.5, sensor CBR: 6.5 ... 9.5
Disturbance signals	Flow via 0/4 … 20 mA signal or contact water meter, 1 - 500 Hz. The multiplicative interference variable can influence all channels, while the additive interference variable only influences one channel.
Control characteristic	P/PID control
Control	2 or 3 bidirectional controls
Analogue outputs	2 (3) x 0/4 ... 20 mA electrically isolated, max. load 450 Ω, range and assignment (measured, correction, control variable) can be set
Control outputs	2 (4) pulse frequency outputs for controlling metering pumps 2 relays (limit value or pulse length control)
Alarm relay	250 V ~3 A, 700 VA contact type, changeover
Digital control inputs	4 (7) as a remote control input for the functions pause control / sample water fault, parameter set switch-over, level monitoring of chemical tanks
Electrical Connection	100 – 230 V, 50/60 Hz, 25 VA, optional 24 V DC
Field bus connection	PROFIBUS^® DP, Modbus RTU, PROFINET
Ambient temperature	32 … 122 °F (0 … 50 °C) (for use indoors or with a protective enclosure)
Enclosure rating	Wall-mounted: IP 66 and IP 67 (NEMA 4X) Mounted in control cabinet: IP 54 for control cabinet door
Tests and approvals	CE and MET (corresponding to UL as per IEC 61010)
Housing material	PC with flame proofing equipment
Dimensions	9.84 x 8.66 x 4.8 in (WxHxD)
Weight	2.9 \| 1.3 lb \| kg

Standard equipment with basic measured variable

PID controller with pulse frequency-based metering pump control for 2 metering pumps.
2 analogue outputs for measured value, correction value or control variable (depending on the optional equipment).
4 digital inputs for sample water fault detection, level switch, pause and parameter switch-over.
2 output relays can be programmed either as output for limit value, cycle timer, real-time timer or control output (depending on the optional equipment).
Measured variables and language selection during commissioning.
Temperature compensation of the pH, chlorine dioxide (CDP) and fluoride measurement via Pt100/Pt1000.
24 operating languages: all European languages as well as Chinese, Russian, Thai, Korean. The operating language is selected during commissioning and can be changed at any time by a keyboard shortcut. The documentation language is selected via the identity code. A data carrier is also supplied that contains all other languages.
Device parametrisation is saved and transferred on an SD card.
Calibration and event data logger (without SD card, data is saved in the controller).
Interference variable processing (flow) via frequency (contact water meter).
Subsequent upgrade of the software function by means of an activation key or firmware update.

Description of the possible measured variables as basic measured variables:

Module VA mV/temperature + mA sensor input:

1 sensor input for pH or ORP sensor and temperature sensor Pt100/Pt1000
1 sensor input for connecting, e.g. chlorine sensors, such as CBR or pH transducer pHV1 and fluoride including interference variable or pH compensation for chlorine.

Module AA mA/mA sensor input:

2 sensor inputs for connecting, e.g. chlorine sensors, such as CBR or pH transducer pHV1, including interference variable or pH compensation for chlorine.

Module VV mV/mV temperature sensor input:

2 sensor inputs for connecting pH and ORP sensors and temperature sensors Pt100/Pt1000, e.g. of type PHER, RHER, PHEI, RHEIC, Pt100SE

Module L3 conductivity temperature sensor input:

2 sensor inputs for connecting conductive conductivity sensors and temperature sensors Pt100/Pt1000, e.g. of type LFT, LMP

Optional equipment for third pH measuring channel

Package 2

Third measuring and control variable pH via mV or mA with or pH compensation for chlorine without external setpoint specification via analogue signal for channel 1 without flow interference variable via mA for channel 1
Third analogue output.
Three additional digital inputs, e.g. for level monitoring, pause and sample water alarm.
Control two additional metering pumps.

Package 3

Third complete measuring and control channel, any measured variable, with PID controller.
Third analogue output for measured value, correction value or control variable (depending on the optional equipment).
Three additional digital inputs, e.g. for level monitoring, pause and sample water alarm.
Temperature compensation of the pH, chlorine dioxide (CDP) and fluoride measurement.

Package 4

Combination of packages 2 and 3 (only one channel for amperometric sensors is available with the mA interference variable).

Communication options

Measurement data logger with SD card.
Visualisation of the measured data using a web server via LAN and PC/tablet PC and web browser.
PROFIBUS DP, Profinet or Modbus RTU.

Hardware upgrade

Protective RC circuit for output relay: Protects the output relay if inductive loads are to be switched (e.g. solenoid valves or motors). Not with 24 V DC electrical connector.

Downloads for Controller DULCOMETER diaLog DACb

Selected filters:

Matching downloads

Sort by Document type

A bis Z

Load more matches ...

No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

Intelligent measuring and controlling

Features and Benefits

One, two or three channels
2-way PID control
Data and event logging with SD Card (optional)
Three analog outputs
Seven digital inputs
Four frequency outputs
Two powered relays
Measured value trend display
pH compensation for Free Chlorine
Temperature compensation for pH, conductivity, and fluoride
NEMA 4X enclosure
LAN/ Ethernet connectivity
PROFIBUS^® DP, Profinet and Modbus RTU
Optional 24V DC power

Video

Application

Technical Data

Technical Details

Measured variables: pH, ORP, chlorine, chlorine dioxide, chlorite, bromine, conductivity, peracetic acid, hydrogen peroxide, ozone, dissolved oxygen and fluoride
Installation, degree of protection: Combination housing (wall mounting, control panel mounting, pillar assembly) IP 67 and IP 66
Control: three measuring and control channels, each with independent monodirectional PID controller (optional: two bidirectional PID controllers)
24 V DC protective low voltage supply e.g. by means of solar system or in the wet area of waterworks
Temperature compensation for pH and for chlorine dioxide process sensor CDP, pH compensation for chlorine
Digital inputs for the processing of control signals, e.g. of sample water limit contacts, remote stop control and to monitor the liquid levels in chemical storage tanks
Control outputs for electronically controlled metering pumps and solenoid valves
Interference variable processing: simple control of water parameters in flowing water by processing the flow in the control algorithm
Adaptation of the controller setpoint to changed process conditions is possible via remote control by means of the mA signal of a PLC or with more stringent requirements via the field bus option

Technical Data


Measured variables and measuring ranges	Connection type mV: pH: 0.00 ... 14.00 ORP potential: -1,500 ... +1,500 mV Type of connection mA (amperometric measured variables, measuring ranges corresponding to sensors): Chlorine Chlorine dioxide Chlorite Bromine Ozone Hydrogen peroxide (PER 1 and PEROX H-3E) Hydrogen peroxide (PEROX H2.10 P with PEROX transducer V2 order. no. 1047979) Peracetic acid Dissolved oxygen Type of connection mA (potentiometic measured variables, measuring ranges corresponding to transmitters): pH ORP potential Fluoride: via module VA and function upgrade package 3 and 4 Conductivity mA via sensor CCT 1-mA-20 mS/cm Temperature: via Pt 100/Pt 1000, measuring range 32 … 302 °F (0 … 150 °C)
Resolution	pH: 0.01 ORP voltage: 1 mV temperature: 0.2 °F (0.1 °C) amperometric analysis (chlorine etc.): 0.001/0.01 ppm, 0.01 vol.%, 0.1 vol.%
Accuracy	0.3% based on the full-scale reading
Measurement input	pH/ORP (input resistance > 0.5 x 10¹² Ω)
Temperature compensation	Pt 100/Pt 1000 for pH, chlorine dioxide (CDP) sensor and fluoride
Correction range temp.	32…212 °F (0…100 °C)
pH compensation range for chlorine	Sensor CLE 3 and CLE 3.1: 6.5 ... 8.5, sensor CBR: 6.5 ... 9.5
Disturbance signals	Flow via 0/4 … 20 mA signal or contact water meter, 1 - 500 Hz. The multiplicative interference variable can influence all channels, while the additive interference variable only influences one channel.
Control characteristic	P/PID control
Control	2 or 3 bidirectional controls
Analogue outputs	2 (3) x 0/4 ... 20 mA electrically isolated, max. load 450 Ω, range and assignment (measured, correction, control variable) can be set
Control outputs	2 (4) pulse frequency outputs for controlling metering pumps 2 relays (limit value or pulse length control)
Alarm relay	250 V ~3 A, 700 VA contact type, changeover
Digital control inputs	4 (7) as a remote control input for the functions pause control / sample water fault, parameter set switch-over, level monitoring of chemical tanks
Electrical Connection	100 – 230 V, 50/60 Hz, 25 VA, optional 24 V DC
Field bus connection	PROFIBUS^® DP, Modbus RTU, PROFINET
Ambient temperature	32 … 122 °F (0 … 50 °C) (for use indoors or with a protective enclosure)
Enclosure rating	Wall-mounted: IP 66 and IP 67 (NEMA 4X) Mounted in control cabinet: IP 54 for control cabinet door
Tests and approvals	CE and MET (corresponding to UL as per IEC 61010)
Housing material	PC with flame proofing equipment
Dimensions	9.84 x 8.66 x 4.8 in (WxHxD)
Weight	2.9 \| 1.3 lb \| kg

Standard equipment with basic measured variable

PID controller with pulse frequency-based metering pump control for 2 metering pumps.
2 analogue outputs for measured value, correction value or control variable (depending on the optional equipment).
4 digital inputs for sample water fault detection, level switch, pause and parameter switch-over.
2 output relays can be programmed either as output for limit value, cycle timer, real-time timer or control output (depending on the optional equipment).
Measured variables and language selection during commissioning.
Temperature compensation of the pH, chlorine dioxide (CDP) and fluoride measurement via Pt100/Pt1000.
24 operating languages: all European languages as well as Chinese, Russian, Thai, Korean. The operating language is selected during commissioning and can be changed at any time by a keyboard shortcut. The documentation language is selected via the identity code. A data carrier is also supplied that contains all other languages.
Device parametrisation is saved and transferred on an SD card.
Calibration and event data logger (without SD card, data is saved in the controller).
Interference variable processing (flow) via frequency (contact water meter).
Subsequent upgrade of the software function by means of an activation key or firmware update.

Description of the possible measured variables as basic measured variables:

Module VA mV/temperature + mA sensor input:

1 sensor input for pH or ORP sensor and temperature sensor Pt100/Pt1000
1 sensor input for connecting, e.g. chlorine sensors, such as CBR or pH transducer pHV1 and fluoride including interference variable or pH compensation for chlorine.

Module AA mA/mA sensor input:

2 sensor inputs for connecting, e.g. chlorine sensors, such as CBR or pH transducer pHV1, including interference variable or pH compensation for chlorine.

Module VV mV/mV temperature sensor input:

2 sensor inputs for connecting pH and ORP sensors and temperature sensors Pt100/Pt1000, e.g. of type PHER, RHER, PHEI, RHEIC, Pt100SE

Module L3 conductivity temperature sensor input:

2 sensor inputs for connecting conductive conductivity sensors and temperature sensors Pt100/Pt1000, e.g. of type LFT, LMP

Optional equipment for third pH measuring channel

Package 2

Third measuring and control variable pH via mV or mA with or pH compensation for chlorine without external setpoint specification via analogue signal for channel 1 without flow interference variable via mA for channel 1
Third analogue output.
Three additional digital inputs, e.g. for level monitoring, pause and sample water alarm.
Control two additional metering pumps.

Package 3

Third complete measuring and control channel, any measured variable, with PID controller.
Third analogue output for measured value, correction value or control variable (depending on the optional equipment).
Three additional digital inputs, e.g. for level monitoring, pause and sample water alarm.
Temperature compensation of the pH, chlorine dioxide (CDP) and fluoride measurement.

Package 4

Combination of packages 2 and 3 (only one channel for amperometric sensors is available with the mA interference variable).

Communication options

Measurement data logger with SD card.
Visualisation of the measured data using a web server via LAN and PC/tablet PC and web browser.
PROFIBUS DP, Profinet or Modbus RTU.

Hardware upgrade

Protective RC circuit for output relay: Protects the output relay if inductive loads are to be switched (e.g. solenoid valves or motors). Not with 24 V DC electrical connector.

Downloads

Find local ProMinent representative

Contact us

ProMinent Fluid Controls, Inc.

sales-us@prominent.com

+1 412-787-2484
sales-us@prominent.com Send request

»We are looking forward to your enquiry.«

+1 412-787-2484

Matching Products

NEW

Electrolysis System CHLORINSITU IIa 60 – 2,500 g/h

Output 60 – 2,500 g/h of chlorine

CHLORINSITU IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from salt and electricity. Key advantages are its simple process management and excellent system safety through integrated ventilation and bleeding.

Electrolysis System CHLORINSITU III

Output 100 – 10,000 g/h of chlorine

Ultra-pure or low-chloride and low-chlorate sodium hypochlorite requires specialist plant engineering. The electrolysis system CHLORINSITU III is the solution for you.

Electrolysis System CHLORINSITU III Compact

Output 25 – 50 g/h of chlorine

Generation of sodium hypochlorite solution for smaller swimming pools and pools.

Electrolysis System CHLORINSITU IV Compact

Output 25 – 50 g/h of chlorine

Produce high-purity chlorine gas in a vacuum process. Cost-effective, robust and compact.

Electrolysis System CHLORINSITU V

Output 100 – 3,500 g/h of chlorine

Electrolysis systems of type CHLORINSITU V take the place of the chlorine gas system in the swimming pool and only need salt, water and electricity to do so.

Electrolysis System CHLORINSITU V Plus

Output 100 – 3,500 g/h of chlorine

Electrolysis systems of type CHLORINSITU V Plus generate ultra-pure chlorine gas directly on site and only need salt, water and electricity to do so. Peaks in demand can be covered by this system (Plus system). They are especially well suited to systems for disinfecting potable water, waste water, process water and water in swimming pools and cooling towers.

NEW

Electrolysis system DULCOLYSE

Output: up to 800 g/h

Efficient production of the highly effective disinfectant DULCOLYT 400 with an exceptionally low chloride and chlorate content. Ideal for particularly sensitive applications in the beverage and food industry, e.g. for the production of baby food. Maximum protection against corrosion and very good cost efficiency.

beta b Solenoid Diaphragm Metering Pump

0.16 to 8.45 gph (0.59 to 32 l/h) at pressures up to 363 psi

The ProMinent beta is a microprocessor-based diaphragm solenoid metering pump capable of flows from 0.16 to 8.45 gph (0.59 to 32 l/h) and pressures to 363 psi (25 bar).

gamma/ X Solenoid Diaphragm Metering Pump

0.61 to 11.89 gph (2.3 to 45 l/h) at pressures up to 363 psi

The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eXcellent ingenuity! With integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X is ideal for all metering work involving liquid media.

gamma/ XL Solenoid Diaphragm Metering Pump

0.08 gpd to 20.74 gph (12.6 ml/h to 78.5 l/h) at pressures up to 363 psi

The gamma/ XL is a smart, connectible solenoid-driven metering pump that is setting new standards in terms of productivity, reliability and cost-effectiveness.

Motor-driven Metering Pump Sigma/ 1 (Basic type)

Capacity range 5.3 - 38 gph (20.4 - 144 l/h), 174 - 58 psi (12 - 4 bar)

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

Motor-driven Metering Pump Sigma X: Sigma/ 1
S1Cb (Control Type)

5.5 to 30.9 gph (21 - 117 l/h) and pressures up to 174 psi (12 bar)

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

Motor-driven Metering Pump Sigma/ 2 (Basic Type)

Capacity range 14.7 – 110.9 gph (56 - 420 l/h), 232 - 58 psi (16 - 4 bar)

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

Motor-driven Metering Pump Sigma X: Sigma/ 2
S2Cb (Control Type)

14.8 to 93.3 gph (56 - 353 l/h) and pressures up to 232 psi (16 bar)

Motor-driven Metering Pump Sigma/ 3 (Basic Type)

Capacity range 45.9 – 264.1 gph (174 - 1,000 l/h), 174 - 58 psi (12 - 4 bar)

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

Motor-driven Metering Pump Sigma X: Sigma/ 3
S3Cb (Control Type)

48 to 274.7 gph (182 - 1,040 l/h) and pressures up to 174 psi (12 bar)

DULCOMETER Controllers

The DULCOMETER Type D1Cb is suitable for applications in drinking water, wastewater, and cooling water treatment. The single channel measuring and control unit D1Cb is equipped for all-important measured variables for basic applications in water treatment and with an error and calibration logbook.

Photometer

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

Nanofiltration System DULCOSMOSE NF

Permeate outputs from 1 to 50 m³/h, higher outputs possible on request

As a nanofiltration system, the DULCOSMOSE NF, a compact and value-for-money unit, can handle partial desalination in industrial applications. Maximum permeate output at low operating pressures ensures low operating costs thanks to the "ultra low pressure" diaphragm.