Suggestions
Products
See all results for products

Motor-driven Metering Pump Sigma X: Sigma/ 1
S1Cb (Control Type)

5.5 to 30.9 gph (21 - 117 l/h) and pressures up to 174 psi (12 bar)

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

Product description

New Technology, Durable Design

The ProMinent Sigma/ 1 is a mechanically actuated diaphragm metering pump capable of flow rates from 5.5 – 30.9 gph (21 - 117 l/h), and pressures up to 174 psi. The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features to provide a high level of operating convenience, safety, and efficiency. The Sigma X features a removable HMI control unit with innovative click-wheel with 4 operating buttons. Also available in basic (non-microprocessor-based version).

Features and Benefits

  • Safe: In the event of an accident, the feed chemical does not escape to the outside nor into the pump's power end, thanks to the patented multi-layer safety diaphragm with optical signalling (electrical as an option).
  • Integrated relief valve protects the pump against overloading and reliable operation by means of a bleed option during the metering process.
  • External control is scalable via potential-free contacts with pulse step-up and step-down, batch mode or via a 0/4-20 mA standard signal.
  • Can be flexibly networked: Connection to process management systems via integral PROFIBUS®.
  • Integral log book saves up to 300 events and simplifies troubleshooting and analysis of the cause.

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Sigma X Family - Module 1 - Introduction

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Sigma X Family - Module 2 - higher efficiency

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Sigma X Family - Module 3 - higher reliablilty

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Sigma X Family - Module 4 - variable metering profiles

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Sigma X Family - Module 5 - flexible in use

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Changing Liquid Ends

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Universal Control Cable

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Turndown Ratio

Field of application

The following list is a general representation of basically suitable applications for this product. Please contact your personal representative to discuss the use of the product in your individual application.

  • Any industrial applications as stand-alone or integrated into a complete system
  • Proportionate addition of chemicals in water treatment, e.g. sodium hypochlorite for disinfection of drinking water
  • Neutralization in waste water treatment
  • Pulse-controlled dosing when bottling different volumes, e.g. glycerine filling of manometers
  • Precise dosing of flavors and vitamins in food production

    Waste Water Treatment in the Paper and Pulp Industry

    Clean waste water is returned to nature

    Very low-impact treatment for waste water. Our intelligent processes efficiently clean and save money too.
    more

    Fighting Legionella in Hotels and Resorts

    Squeezing out legionella and pathogens

    It can be disastrous for any hotel if guests come down with legionella and seek claims for damages from the company. ProMinent provides effective solutions for eliminating legionella and other pathogens in the long term.
    more

    Potable Water Supply in Hotels and Resorts

    Only the best for your guests: clean potable water around the clock

    Clean potable water is a basic requirement for guest satisfaction and therefore commercial success. ProMinent's treatment systems enable you to provide outstanding quality water all year round.
    more

    Cleaning fruit and vegetables

    Simple and reliable cleaning process for agricultural products

    Fresh fruit and veg are an essential part of our diet. So it's very important for them to reach the consumer in a safe condition. Precise metering of chlorine dioxide ensures that this is the case.
    more

    Swimming Pool Water Treatment in Hotels and Resorts

    Absolutely essential: an attractive pool with crystal-clear water

    You are an expert in pampering your guests, young and old, with everything they could desire. This usually includes an attractive swimming pool or even a luxurious spa. This is where one of our core skills come in.
    more

    Technical Details

    • Stroke length: 4 mm
    • Stroke length adjustment range: 0 - 100
    • Stroke length adjustment: manually by means of self-locking rotary dial in 1 % increments
    • Under correct, constant conditions, correct installation and calibration, the precision is better than ±1 %, based on maximum stroke volume.
    • Wetted materials: PVDF, stainless steel 1.4571/1.4404 (special materials on request)
    • Power supply: 1 pH, 100 - 230 V ±10 %, 240 V ±6 %, 50/60 Hz (110 W)
    • Degree of protection IP 65
    • Glass fiber reinforced plastic housing
    • Liquid end on the left can be selected as standard for special installation situations or in combination with tanks, brackets, etc.
    • Programmable mA input
    • Manual or external contact operation adjustable, factor for external contact control 99:1 - 1:99; batch operation with max. 99,999 strokes/start pulse.
    • Dosing profiles for optimum dosing results.
    • Display of wear parts in the service menu.
    • Connector for level switch 2-stage.
    • Connection to PROFINET via ProMinent DULCOnvert PROFIBUS®- PROFINET converter.
    • Various relay modules available
    • Variants with EU 1935/2004, FDA or Hygienic Design are available for food applications.
    • Customized designs are available on request.

    For safety reasons, suitable overflow devices must be provided for all mechanically actuated Diaphragm Metering Pumps during installation.

    Technical Data

    Type

    Capacity at max. back pressure

    Suction lift

    Perm. pre-pressure suction side

    Connector Suction/Discharge Side

    Shipping weight

    Max. stroke rate

    S1Cb

    gph | l/h

    psi

    ml/stroke

    Strokes/min

    ft | m WC

    psi

    inches

    lb | kg

    12017 SST

    5.55 | 21

    174

    3.8

    90

    23 | 7

    15

    3/8 FNPT

    26.4 | 12

    12017 PVT

    5.55 | 21

    145

    3.8

    90

    23 | 7

    15

    1/2 MNPT

    19.8 | 9

    12035 PVT

    11.1 | 42

    145

    4.0

    170

    23 | 7

    15

    1/2 MNPT

    19.8 | 9

    12035 SST

    11.1 | 42

    174

    4.0

    170

    23 | 7

    15

    3/8 FNPT

    26.4 | 12

    10050 PVT

    12.95 | 49

    145

    4.0

    200

    23 | 7

    15

    1/2 MNPT

    19.8 | 9

    10050 SST

    12.95 | 49

    145

    4.0

    200

    23 | 7

    15

    3/8 FNPT

    26.4 | 12

    10022 PVT

    7.13 | 27

    145

    5.0

    90

    20 | 6

    15

    1/2 MNPT

    19.8 | 9

    10022 SST

    7.13 | 27

    145

    5.0

    90

    20 | 6

    15

    3/8 FNPT

    26.4 | 12

    10044 PVT

    14 | 53

    145

    5.1

    170

    20 | 6

    15

    1/2 MNPT

    19.8 | 9

    10044 SST

    14 | 53

    145

    5.1

    170

    20 | 6

    15

    3/8 FNPT

    26.4 | 12

    07065 PVT

    16.64 | 63

    102

    5.2

    200

    20 | 6

    15

    1/2 MNPT

    19.8 | 9

    07065 SST

    16.64 | 63

    102

    5.2

    200

    20 | 6

    15

    3/8 FNPT

    26.4 | 12

    07042 PVT

    13.74 | 52

    102

    9.5

    90

    10 | 3

    15

    3/4 MNPT

    22 | 10

    07042 SST

    13.74 | 52

    102

    9.5

    90

    10 | 3

    15

    1/2 FNPT

    30.9 | 14

    04084 PVT

    26.68 | 101

    58

    9.7

    170

    10 | 3

    15

    3/4 MNPT

    22 | 10

    04084 SST

    26.68 | 101

    58

    9.7

    170

    10 | 3

    15

    1/2 FNPT

    30.9 | 14

    04120 PVT

    30.91 | 117

    58

    9.7

    200

    10 | 3

    15

    3/4 MNPT

    22 | 10

    04120 SST

    30.91 | 117

    58

    9.7

    200

    10 | 3

    15

    1/2 FNPT

    30.9 | 14

    Materials in Contact with the Medium

    Identity code of material

    Dosing head

    Connection on suction/discharge side

    Seals/ball seat

    Balls

    Integral relief valve

    PVT

    PVDF

    PVDF

    PTFE/PTFE

    Ceramic

    PVDF/FKM or EPDM

    SST

    Stainless steel 1.4404

    Stainless steel 1.4581

    PTFE/PTFE

    Stainless steel 1.4404

    Stainless steel/FKM or EPDM

    PVF

    PVDF

    PVDF

    PTFE/PTFE

    Ceramic

    PVDF/FKM or EPDM

    SSF

    Stainless steel 1.4404

    Stainless steel 1.4581

    PTFE/PTFE

    Stainless steel 1.4404

    Stainless steel/FKM or EPDM

    SSG

    Stainless steel 1.4404

    Stainless steel 1.4581

    PTFE/stainless steel 1.4404

    Stainless steel 1.4404

    -

    SSH

    Stainless steel 1.4435

    Stainless steel 1.4435

    EPDM or FKM/stainless steel 1.4435

    Ceramic

    -

    Motor Data

    Identity code specification Power supply  Remarks
    U1-phase, IP 65100 – 230 V ±10 % / 240 V ±6 %50/60 Hz110 WWide-range voltage power unit

    Motors less than 0.75 kW and motors designed for speed-controllable operation are not subject to the IE3 standard in compliance with the Ecodesign Directive 2009/125/EC.

    Downloads for Motor-driven Metering Pump Sigma X: Sigma/ 1
    S1Cb (Control Type)

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)
    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    New Technology, Durable Design

    The ProMinent Sigma/ 1 is a mechanically actuated diaphragm metering pump capable of flow rates from 5.5 – 30.9 gph (21 - 117 l/h), and pressures up to 174 psi. The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features to provide a high level of operating convenience, safety, and efficiency. The Sigma X features a removable HMI control unit with innovative click-wheel with 4 operating buttons. Also available in basic (non-microprocessor-based version).

    Features and Benefits

    • Safe: In the event of an accident, the feed chemical does not escape to the outside nor into the pump's power end, thanks to the patented multi-layer safety diaphragm with optical signalling (electrical as an option).
    • Integrated relief valve protects the pump against overloading and reliable operation by means of a bleed option during the metering process.
    • External control is scalable via potential-free contacts with pulse step-up and step-down, batch mode or via a 0/4-20 mA standard signal.
    • Can be flexibly networked: Connection to process management systems via integral PROFIBUS®.
    • Integral log book saves up to 300 events and simplifies troubleshooting and analysis of the cause.

    Video

    Application

    Technical Data

    Downloads

    Find local ProMinent representative

    Contact us

    ProMinent Fluid Controls, Inc.


    sales-us@prominent.com

    +1 412-787-2484   
    sales-us@prominent.com Send request    

    »We are looking forward to your enquiry.«

    +1 412-787-2484 

    Spare Parts and Accessories

    Brackets, adapter plates and stands

    Here pumps are mounted on top or below.

    Wall brackets and floor stands to hold a metering pump, including attachment fittings.

     more

    Connectors, Fittings, Connector Kits, Seals, Adapters

    The right accessories for every metering application

    Connects hoses and connectors of different sizes

     more

    Control Cables and Adapters for Low-Pressure Metering Pumps

    Suitable accessories for even the simplest tasks

    Cables, plugs and adapters connect metering pumps to external control devices.

     more

    Suction Lances, Suction Assemblies and Level Switches for Low-Pressure Metering Pumps

    The right kits for every metering task

    Suction lances, suction assemblies and level switches for a smooth metering process

     more

    Tanks

    Anyone who works with chemicals, needs to store them safely. ProMinent dosing tanks are tough and ideal for working with metering pumps.

    PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

     more

    Matching Products

    Motor-driven Metering Pump Sigma/ 1 (Basic type)

    Capacity range 5.3 - 38 gph (20.4 - 144 l/h), 174 - 58 psi (12 - 4 bar)

    The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

    more

    Motor-driven Metering Pump Sigma/ 2 (Basic Type)

    Capacity range 14.7 – 110.9 gph (56 - 420 l/h), 232 - 58 psi (16 - 4 bar)

    Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

    more

    Motor-driven Metering Pump Sigma X: Sigma/ 2
    S2Cb (Control Type)

    14.8 to 93.3 gph (56 - 353 l/h) and pressures up to 232 psi (16 bar)

    The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

    more

    Motor-driven Metering Pump Sigma/ 3 (Basic Type)

    Capacity range 45.9 – 264.1 gph (174 - 1,000 l/h), 174 - 58 psi (12 - 4 bar)

    The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

    more

    Motor-driven Metering Pump Sigma X: Sigma/ 3
    S3Cb (Control Type)

    48 to 274.7 gph (182 - 1,040 l/h) and pressures up to 174 psi (12 bar)

    The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

    more

    DULCOMETER Controllers

    The DULCOMETER Type D1Cb is suitable for applications in drinking water, wastewater, and cooling water treatment. The single channel measuring and control unit D1Cb is equipped for all-important measured variables for basic applications in water treatment and with an error and calibration logbook.

    more

    Controller DULCOMETER diaLog DACb

    The DULCOMETER DACb controller uses intelligent controller functions to close the control circuit between ProMinent DULCOTEST sensors and ProMinent metering pumps.

    more

    Dosing Tanks

    Capacity 35 – 1,000 l

    PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

    more

    DULCONNEX Gateway

    The DULCONNEX Gateway safely and reliably transfers the data of all products supported as standard to the DULCONNEX Cloud

    more

    Case studies for this product

    +1 412-787-2484
    Request
    Newsletter
    Call
    Request
    Newsletter