Suggestions

Products

Plunger Metering Pump Makro TZ

Capacity range of single head pump: 2.1 - 301.4 gph (8 – 1,141 l/h), 4,641 - 160 psi

The plunger metering pump Makro TZ impresses with its excellent process reliability, outstanding flexibility and its modular construction enables it to be outstandingly adapted to the performance requirements of the respective application.

Send request

Product description

Powerful, built to last with a plunger

The plunger metering pump Makro TZ (TZKa) has an adjustable eccentric drive mechanism and, together with the Makro TZ diaphragm metering pump, forms a range of drive mechanisms with stroke lengths of 10 and/or 20 mm. A wide range of drive versions is available, including some for use in Exe and Exde areas with ATEX certification.

Features and Benefits

Process reliability:

Metering reproducibility is better than ± 0.5 % within the 10 – 100% stroke length range under defined conditions and with correct installation

Excellent flexibility:

The modular construction with single and double-head versions permits a wide range of applications, with the double head designs being operated in push-pull mode
It is possible to combine up to 4 metering units, even with different pump capacities, in multiple pump systems
4 different gear ratios are available
Customised designs are available on request

The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

Hydraulic Fracturing

Field of application

The following list is a general representation of basically suitable applications for this product. Please contact your personal representative to discuss the use of the product in your individual application.

Volume-proportional metering of chemicals/additives in water treatment
Metering of reactants and catalysts in the chemical industry
Level-dependent metering of additives in industrial production engineering

Metering of Fluids in Chemical Production

Incredible versatility: metering pumps in production

There are various types of metering pumps, but what they all have in common is reliability, robustness and thoroughness. That's why all our pumps are in demand in chemical production.

Inhibitor Metering Offshore

For smooth oil production

Our ProMinent metering pumps keep the pipework clear 24 hours a day and protect against corrosion and defects. So the oil can keep flowing.

Onshore Metering in Gas Pump Stations

Safety at the borehole

Flammable methane hydrate at the borehole can be very dangerous. But not with ProMinent metering pumps. By metering fluid into the drilling head, they don't even allow methane hydrate to be produced in the first place.

Downstream Oil Treatment

It's all about the oil

Makro diaphragm metering pumps or even the new Evolution pumps are used for emulsion cracking so that the precious oil is perfectly separated from other substances. The pumps are completely autonomous.

Metering of Fluids

Incredibly simple and efficient metering of chemicals

We transport chemicals with ease in any industrial environment: ProMinent solutions store, transfer and meter substances at rates of 0.1 l/h to 100,000 l/h at a pressure of 2 to 3,000 bar.

Stroke length: 0-20 mm
Rod force: 8000 N
Stroke length adjustment range: 0 – 100%
Stroke length adjustment: manually using shift ring in 0.5% increments (optionally with electric actuator or control drive)
Metering reproducibility is better than ± 0.5% within the 10 – 100% stroke length range under defined conditions and with proper installation. Observe the information in the operating instructions.
High-performance ceramic-coated stainless steel plunger Wetted materials: Stainless steel 1.4571. Special materials are available on request
A wide range of drive versions is available: Three-phase standard AC motors, motors for use in areas at risk from explosion and different flange designs for use in customer-specific motors
Degree of protection: IP 55
Salt water-resistant, acrylic resin-coated cast aluminium housing
Provide suitable overflow equipment in all plunger metering pumps during installation for safety reasons

Technical Data

Type	Capacity at max. back pressure with 1500 rpm motor at 50 Hz				Capacity at max. back pressure at 60 Hz			Suction lift	Connector Suction/Discharge Side	Shipping weight	Plunger Ø
				Max. stroke rate	Max. stroke rate
	gph \| l/h	psi	ml/stroke	Strokes/min	psi	gph \| l/h	Strokes/min	ft \| m WC	inches	lb \| kg	inch
* The suction and discharge side Rp 1/4 and Rp 3/8 connectors have an internal thread connection and are configured as double ball valves.
320009 *	2.3 \| 8.7	4641	2.0	72	4,627	2.6 \| 10	86	13 \| 4.0		110.2 \| 50	0.47
320012 *	3.06 \| 11.6	4641	2.0	96	4,627	3.7 \| 14	115	13 \| 4.0		110.2 \| 50	0.47
320014 *	3.83 \| 14.5	4641	2.0	120	4,627	4.5 \| 17	144	13 \| 4.0		110.2 \| 50	0.47
320017 *	4.6 \| 17.4	4641	2.0	144	4,627	5.5 \| 21	173	13 \| 4.0		110.2 \| 50	0.47
320018 *	4.68 \| 17.7	4641	4.1	72	4,627	5.5 \| 21	86	13 \| 4.0		110.2 \| 50	0.67
320024 *	6.24 \| 23.6	4641	4.1	96	4,627	7.4 \| 28	115	13 \| 4.0		119 \| 54	0.67
320030 *	7.79 \| 29.5	4641	4.1	120	4,627	9.2 \| 35	144	13 \| 4.0		119 \| 54	0.67
313035 *	9.35 \| 35.4	4540	4.1	144	4,526	11.1 \| 42	173	13 \| 4.0		119 \| 54	0.67
192033 *	8.69 \| 32.9	2785	7.6	72	2,776	10.3 \| 39	86	13 \| 4.0		121.2 \| 55	0.91
192044 *	11.6 \| 43.9	2785	7.6	96	2,776	15.6 \| 59	115	13 \| 4.0		121.2 \| 55	0.91
192055 *	14.48 \| 54.8	2785	7.6	120	2,776	17.4 \| 66	144	13 \| 4.0		121.2 \| 55	0.91
168066 *	17.38 \| 65.8	2437	7.6	144	2,437	20.9 \| 79	173	13 \| 4.0		121.2 \| 55	0.91
113057 *	15.19 \| 57.5	1639	13.3	72	1,634	18.2 \| 69	86	13 \| 4.0		123.4 \| 56	1.18
113077 *	20.24 \| 76.6	1639	13.3	96	1,634	24.3 \| 92	115	13 \| 4.0		123.4 \| 56	1.18
113096 *	25.31 \| 95.8	1639	13.3	120	1,634	30.4 \| 115	144	13 \| 4.0		123.4 \| 56	1.18
096115 *	30.36 \| 114.9	1392	13.3	144	1,392	36.5 \| 138	173	13 \| 4.0		123.4 \| 56	1.18
063104	27.56 \| 104.3	914	24.2	72	911	33.0 \| 125	86	13 \| 4.0		127.8 \| 58	1.57
063139	36.72 \| 139.0	914	24.2	96	911	44.1 \| 167	115	13 \| 4.0		127.8 \| 58	1.57
063174	45.92 \| 173.8	914	24.2	120	914	55.2 \| 209	144	13 \| 4.0		127.8 \| 58	1.57
052208	55.09 \| 208.5	754	24.2	144	754	66.0 \| 250	173	13 \| 4.0		127.8 \| 58	1.57
040163	43.04 \| 162.9	580	37.7	72	578	51.5 \| 195	86	13 \| 4.0		127.8 \| 58	1.97
040217	57.38 \| 217.2	580	37.7	96	578	68.9 \| 261	115	13 \| 4.0		127.8 \| 58	1.97
040271	71.73 \| 271.5	580	37.7	120	580	86.1 \| 326	144	13 \| 4.0		127.8 \| 58	1.97
033326	86.08 \| 325.8	479	37.7	144	479	103.3 \| 391	173	13 \| 4.0		127.8 \| 58	1.97
028237	62.62 \| 237.0	406	54.9	72	405	75.0 \| 284	86	13 \| 4.0		136.6 \| 62	2.36
028316	83.46 \| 315.9	406	54.9	96	405	100.1 \| 379	115	13 \| 4.0		136.6 \| 62	2.36
027395	104.33 \| 394.9	392	54.9	120	392	125.2 \| 474	144	13 \| 4.0		136.6 \| 62	2.36
022474	125.2 \| 473.9	319	54.9	144	319	150.3 \| 569	173	13 \| 4.0		136.6 \| 62	2.36
020322	85.2 \| 322.5	290	74.7	72	289	102.2 \| 387	86	13 \| 4.0		136.6 \| 62	2.76
020430	113.61 \| 430.0	290	74.7	96	289	136.3 \| 516	115	13 \| 4.0		136.6 \| 62	2.76
020538	142.03 \| 537.6	290	74.7	120	290	170.4 \| 645	144	13 \| 4.0		136.6 \| 62	2.76
016645	170.44 \| 645.1	232	74.7	144	232	204.5 \| 774	173	13 \| 4.0		136.6 \| 62	2.76
014475	125.52 \| 475.1	203	110.0	72	202	150.8 \| 571	86	13 \| 4.0		149.9 \| 68	3.35
014634	167.53 \| 634.1	203	110.0	96	202	201.0 \| 761	115	13 \| 4.0		149.9 \| 68	3.35
013793	209.4 \| 792.6	189	110.0	120	189	251.2 \| 951	144	13 \| 4.0		149.9 \| 68	3.35
011951	251.28 \| 951.1	160	110.0	144	160	301.4 \| 1,141	173	13 \| 4.0		149.9 \| 68	3.35

Other gear reduction ratios are available upon request.

The permissible priming pressure on the suction side is approximately 50% of the max. permitted back pressure.

Materials in Contact with the Medium

Identity code of material	Hydraulic Ø mm	Dosing head	Connection on suction/discharge side	Ball seat	Valve balls	Plungers
SST	…12 S to 50 S	Stainless steel 1.4571/1.4404	Stainless steel 1.4571/1.4404	Stainless steel/PTFE	Oxide ceramic	Stainless steel/ceramic
SST	…60 S to 70 S	Stainless steel 1.4571/1.4404	Stainless steel 1.4581	PTFE	Stainless steel 1.4404	Stainless steel/ceramic
SST	…85 S	Stainless steel 1.4571/1.4404	Stainless steel 1.4581	PTFE	Stainless steel 1.4404 (plate)/Hastelloy C (spring)	Stainless steel/ceramic

Motor Data

Identity code specification		Power supply			Remarks
S	3-phase, IP 55^*	230 V/400 V	50 Hz	1.5 kW
R	3-phase, IP 55^*	230 V/400 V	50/60 Hz	2.2 kW	With PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz
V0	3-phase, IP 55^*	400 V	50 Hz	3.0 kW	Variable speed stroke control motor with integrated frequency converter
L1	3-phase,II 2G Ex eb IIC T3 Gb	220 – 240 V/380 – 420 V	50 Hz	1.5 kW
L2	3-phase,II 2G Ex db IIC T4 Gb	220 – 240 V/380 – 420 V	50 Hz	1.5 kW	With PTC, speed control range 1:5
P1	3-phase,II 2G Ex e IIC T3	250 – 280 V/440 – 480 V	60 Hz	2.0 kW	On request
P2	3-phase,II 2G Ex de IIC T4	250 – 280 V/440 – 480 V	60 Hz	1.5 kW	With PTC, speed control range 1:5, available on request

Motor data sheets can be requested for more information. Versions 265/460V - 60Hz, special motors or special motor flanges are available on request.

Information for use in areas at risk from explosion

Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EC in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label correspond to or are superior to the conditions prevalent in the intended application.

Downloads for Plunger Metering Pump Makro TZ

Selected filters:

Matching downloads

Sort by Document type

A bis Z

Load more matches ...

No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

Powerful, built to last with a plunger

Features and Benefits

Process reliability:

Metering reproducibility is better than ± 0.5 % within the 10 – 100% stroke length range under defined conditions and with correct installation

Excellent flexibility:

The modular construction with single and double-head versions permits a wide range of applications, with the double head designs being operated in push-pull mode
It is possible to combine up to 4 metering units, even with different pump capacities, in multiple pump systems
4 different gear ratios are available
Customised designs are available on request

Video

Application

Technical Data

Technical Details

Stroke length: 0-20 mm
Rod force: 8000 N
Stroke length adjustment range: 0 – 100%
Stroke length adjustment: manually using shift ring in 0.5% increments (optionally with electric actuator or control drive)
Metering reproducibility is better than ± 0.5% within the 10 – 100% stroke length range under defined conditions and with proper installation. Observe the information in the operating instructions.
High-performance ceramic-coated stainless steel plunger Wetted materials: Stainless steel 1.4571. Special materials are available on request
A wide range of drive versions is available: Three-phase standard AC motors, motors for use in areas at risk from explosion and different flange designs for use in customer-specific motors
Degree of protection: IP 55
Salt water-resistant, acrylic resin-coated cast aluminium housing
Provide suitable overflow equipment in all plunger metering pumps during installation for safety reasons

Technical Data

Type	Capacity at max. back pressure with 1500 rpm motor at 50 Hz				Capacity at max. back pressure at 60 Hz			Suction lift	Connector Suction/Discharge Side	Shipping weight	Plunger Ø
				Max. stroke rate	Max. stroke rate
	gph \| l/h	psi	ml/stroke	Strokes/min	psi	gph \| l/h	Strokes/min	ft \| m WC	inches	lb \| kg	inch
* The suction and discharge side Rp 1/4 and Rp 3/8 connectors have an internal thread connection and are configured as double ball valves.
320009 *	2.3 \| 8.7	4641	2.0	72	4,627	2.6 \| 10	86	13 \| 4.0		110.2 \| 50	0.47
320012 *	3.06 \| 11.6	4641	2.0	96	4,627	3.7 \| 14	115	13 \| 4.0		110.2 \| 50	0.47
320014 *	3.83 \| 14.5	4641	2.0	120	4,627	4.5 \| 17	144	13 \| 4.0		110.2 \| 50	0.47
320017 *	4.6 \| 17.4	4641	2.0	144	4,627	5.5 \| 21	173	13 \| 4.0		110.2 \| 50	0.47
320018 *	4.68 \| 17.7	4641	4.1	72	4,627	5.5 \| 21	86	13 \| 4.0		110.2 \| 50	0.67
320024 *	6.24 \| 23.6	4641	4.1	96	4,627	7.4 \| 28	115	13 \| 4.0		119 \| 54	0.67
320030 *	7.79 \| 29.5	4641	4.1	120	4,627	9.2 \| 35	144	13 \| 4.0		119 \| 54	0.67
313035 *	9.35 \| 35.4	4540	4.1	144	4,526	11.1 \| 42	173	13 \| 4.0		119 \| 54	0.67
192033 *	8.69 \| 32.9	2785	7.6	72	2,776	10.3 \| 39	86	13 \| 4.0		121.2 \| 55	0.91
192044 *	11.6 \| 43.9	2785	7.6	96	2,776	15.6 \| 59	115	13 \| 4.0		121.2 \| 55	0.91
192055 *	14.48 \| 54.8	2785	7.6	120	2,776	17.4 \| 66	144	13 \| 4.0		121.2 \| 55	0.91
168066 *	17.38 \| 65.8	2437	7.6	144	2,437	20.9 \| 79	173	13 \| 4.0		121.2 \| 55	0.91
113057 *	15.19 \| 57.5	1639	13.3	72	1,634	18.2 \| 69	86	13 \| 4.0		123.4 \| 56	1.18
113077 *	20.24 \| 76.6	1639	13.3	96	1,634	24.3 \| 92	115	13 \| 4.0		123.4 \| 56	1.18
113096 *	25.31 \| 95.8	1639	13.3	120	1,634	30.4 \| 115	144	13 \| 4.0		123.4 \| 56	1.18
096115 *	30.36 \| 114.9	1392	13.3	144	1,392	36.5 \| 138	173	13 \| 4.0		123.4 \| 56	1.18
063104	27.56 \| 104.3	914	24.2	72	911	33.0 \| 125	86	13 \| 4.0		127.8 \| 58	1.57
063139	36.72 \| 139.0	914	24.2	96	911	44.1 \| 167	115	13 \| 4.0		127.8 \| 58	1.57
063174	45.92 \| 173.8	914	24.2	120	914	55.2 \| 209	144	13 \| 4.0		127.8 \| 58	1.57
052208	55.09 \| 208.5	754	24.2	144	754	66.0 \| 250	173	13 \| 4.0		127.8 \| 58	1.57
040163	43.04 \| 162.9	580	37.7	72	578	51.5 \| 195	86	13 \| 4.0		127.8 \| 58	1.97
040217	57.38 \| 217.2	580	37.7	96	578	68.9 \| 261	115	13 \| 4.0		127.8 \| 58	1.97
040271	71.73 \| 271.5	580	37.7	120	580	86.1 \| 326	144	13 \| 4.0		127.8 \| 58	1.97
033326	86.08 \| 325.8	479	37.7	144	479	103.3 \| 391	173	13 \| 4.0		127.8 \| 58	1.97
028237	62.62 \| 237.0	406	54.9	72	405	75.0 \| 284	86	13 \| 4.0		136.6 \| 62	2.36
028316	83.46 \| 315.9	406	54.9	96	405	100.1 \| 379	115	13 \| 4.0		136.6 \| 62	2.36
027395	104.33 \| 394.9	392	54.9	120	392	125.2 \| 474	144	13 \| 4.0		136.6 \| 62	2.36
022474	125.2 \| 473.9	319	54.9	144	319	150.3 \| 569	173	13 \| 4.0		136.6 \| 62	2.36
020322	85.2 \| 322.5	290	74.7	72	289	102.2 \| 387	86	13 \| 4.0		136.6 \| 62	2.76
020430	113.61 \| 430.0	290	74.7	96	289	136.3 \| 516	115	13 \| 4.0		136.6 \| 62	2.76
020538	142.03 \| 537.6	290	74.7	120	290	170.4 \| 645	144	13 \| 4.0		136.6 \| 62	2.76
016645	170.44 \| 645.1	232	74.7	144	232	204.5 \| 774	173	13 \| 4.0		136.6 \| 62	2.76
014475	125.52 \| 475.1	203	110.0	72	202	150.8 \| 571	86	13 \| 4.0		149.9 \| 68	3.35
014634	167.53 \| 634.1	203	110.0	96	202	201.0 \| 761	115	13 \| 4.0		149.9 \| 68	3.35
013793	209.4 \| 792.6	189	110.0	120	189	251.2 \| 951	144	13 \| 4.0		149.9 \| 68	3.35
011951	251.28 \| 951.1	160	110.0	144	160	301.4 \| 1,141	173	13 \| 4.0		149.9 \| 68	3.35

Other gear reduction ratios are available upon request.

The permissible priming pressure on the suction side is approximately 50% of the max. permitted back pressure.

Materials in Contact with the Medium

Identity code of material	Hydraulic Ø mm	Dosing head	Connection on suction/discharge side	Ball seat	Valve balls	Plungers
SST	…12 S to 50 S	Stainless steel 1.4571/1.4404	Stainless steel 1.4571/1.4404	Stainless steel/PTFE	Oxide ceramic	Stainless steel/ceramic
SST	…60 S to 70 S	Stainless steel 1.4571/1.4404	Stainless steel 1.4581	PTFE	Stainless steel 1.4404	Stainless steel/ceramic
SST	…85 S	Stainless steel 1.4571/1.4404	Stainless steel 1.4581	PTFE	Stainless steel 1.4404 (plate)/Hastelloy C (spring)	Stainless steel/ceramic

Motor Data

Identity code specification		Power supply			Remarks
S	3-phase, IP 55^*	230 V/400 V	50 Hz	1.5 kW
R	3-phase, IP 55^*	230 V/400 V	50/60 Hz	2.2 kW	With PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz
V0	3-phase, IP 55^*	400 V	50 Hz	3.0 kW	Variable speed stroke control motor with integrated frequency converter
L1	3-phase,II 2G Ex eb IIC T3 Gb	220 – 240 V/380 – 420 V	50 Hz	1.5 kW
L2	3-phase,II 2G Ex db IIC T4 Gb	220 – 240 V/380 – 420 V	50 Hz	1.5 kW	With PTC, speed control range 1:5
P1	3-phase,II 2G Ex e IIC T3	250 – 280 V/440 – 480 V	60 Hz	2.0 kW	On request
P2	3-phase,II 2G Ex de IIC T4	250 – 280 V/440 – 480 V	60 Hz	1.5 kW	With PTC, speed control range 1:5, available on request

Motor data sheets can be requested for more information. Versions 265/460V - 60Hz, special motors or special motor flanges are available on request.

Information for use in areas at risk from explosion

Downloads

Find local ProMinent representative

Contact us

ProMinent Fluid Controls, Inc.

sales-us@prominent.com

+1 412-787-2484
sales-us@prominent.com Send request

»We are looking forward to your enquiry.«

+1 412-787-2484