Command and control software for MultiFlex and Aegis Controllers for cooling towers and boilers.
Trackster 3 is the command-and-control software for MultiFlex and Aegis Controllers for cooling towers and boilers. Multiflex and Aegis controllers may control multiple cooling towers or boilers or a mix of boilers, towers, and closed loops. Trackster provides you with the tools to view and control the water treatment of both simple and complex installations in real time. Report generation, data import/export, manual data entry, alarm logging and controller networking tools fill up the Trackster toolbox.
Features and Benefits
- Real Time Views of Your Cooling Towers and Boilers
- Remote Connections
- Powerful Reporting Tools
Real Time Views of Your Cooling Towers and Boilers
Use the tower and boiler Views provided with Trackster or use the view editor to move the pipes, pumps, valves, towers, boilers... to look like your site or sites. Import your own images/photographs to make your own custom LiveViews. Trackster allows you to watch as pumps and valves turn from green to red, conductivity increases, pH drops, flow switches ON, corrosion rates trend, biocides pump, water meters make-up and blowdown valves flash, feedwater temps fall, and sulfite feed ramps up: - It's all visual and all real time. Site Structured Reporting Controllers are organized by Site; where a Site may be a physical location, or all controllers and manual entry logs associated with one customer. Reports may merge data from all controllers from any site.
In addition to connecting to your controller locally, Trackster 3 gives you the capability to connect to your controllers via modem and/or Ethernet. This means that you can be located anywhere in the world and still have total control of your cooling and/or boiling controls. Complete Maintenance and Configuration Toolbox Adjust setpoints, reset alarms, re-calibrate, switch inhibitor feed modes and biocide timing, span 4-20mA loops, monitor corrosion rates tank levels, tower, and feedwater temperatures... Adjust water meters, set pager dial-out, switch pump control sensors. AutoPoll Historical Data and Alarms Trackster 3.2 supports two different types of AutoPolling - 1. AutoPoll Historical Data and 2. AutoPoll Alarms. 1. AutoPoll Historical Data - Automatically download historical data from controller's and optionally, email out the historical data to one or more Email recipients. 2. AutoPoll Alarms - Trackster will check for new alarms on your controller's. If one or more alarms are found, Trackster will email the information to one or more Email and/or Cell Phone recipients. Being notified via your cell phone can have you aware of any and all alarms from all of your controller's up to the minute!
Note: With Trackster 3 you AutoPoll our legacy SmartFlex and SmartAS controllers for Historical Data and Alarms. After you download the data, you can use Trackster 3 to create and view SmartFlex and SmartAS reports.
Powerful Reporting Tools
Combine multiple controllers and formulas into one report. View sensor data with respect to control setpoints and/or alarms. Share your reports via email. Export and Import Tools Export Trackster reports and raw data directly to Excel and other formats.
Note: With Trackster 3 you can download historical data from our legacy SmartFlex and SmartAS controllers. After you download the data, you can use Trackster 3 to create and view SmartFlex and SmartAS reports.
View and configure your controller with customizable LiveViews.
Downloads for Trackster Software
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.