Suggestions
Products
See all results for products

DULCOTEST temperature sensors

Measuring ranges 32 … 212 °F (0 … 100 °C)

Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

Product description

Temperature measurement with the reliable DULCOTEST sensors

Temperature measurement can take place separately or as a correction variable for other measured parameters.

Temperature measurement is used universally, either to directly measure the temperature or for temperature compensation when measuring the following parameters:

  • pH
  • Fluoride
  • Conductivity
  • Chlorine dioxide
  • Hydrogen peroxide

Features and Benefits

  • Select Pt 100 or Pt 1000, depending on measuring range and accuracy required.
  • Sturdy design with dimensions of a standard pH sensor; the sensor element is integrated in a chemically inert glass sleeve.
  • Easily installed in a similar way to standard pH sensors with a PG 13.5 thread in existing fittings.
  • Transmitter with display/operation and without display/operation for transmission/conversion of the primary signal into a 4-20 mA signal and for transmission to a central control unit (PLC).

Field of application

The following list is a general representation of basically suitable applications for this product. Please contact your personal representative to discuss the use of the product in your individual application.

  • Temperature measurement is universally used either to directly measure the temperature or for temperature compensation.

    Monitoring and Replenishing of Electroplating Baths

    Demanding baths require concentration

    Baths have to be monitored and replenished continually. This requires high concentration - from the sensors, controllers and pumps. Yet only small amounts of precisely fed chemicals are needed.
    more

    Waste Water Treatment in the Paper and Pulp Industry

    Clean waste water is returned to nature

    Very low-impact treatment for waste water. Our intelligent processes efficiently clean and save money too.
    more

    Flotation in Mining

    Frothers and collecting agents

    To remove ore from the flotation liquid faster, activating chemicals (frothers and collecting agents) have to be accurately added by metering. Getting the right amounts is crucial.
    more

    Cooling Water Treatment

    Efficiency is everything in the cooling water circuit

    Everything at ProMinent revolves around the perfect cooling water circuit, which needs to experience few losses over its long life. The precise metering of inhibitors and biocides and suitable filters make this possible.
    more

    Utility Water Treatment

    It makes economic sense to reuse process water.

    Why would you discharge water just because you've used it once? If this water is treated properly, it can be reused with ease, cutting costs in no time.
    more

    Waste Water Treatment

    Very low-impact treatment for waste water

    Our water treatment technology delivers thorough yet environmentally friendly waste water treatment. What's more, with precisely metered additives and optimised processes, you also save money.
    more

    Technical Details

    • Type Pt 100: for wide range measurements and with the controllers D1C, DAC and DULCOMARIN 3
    • Type Pt 1000: for high resolution with transmitter DMT and controllers DAC and DULCOMARIN 3

    DULCOTEST Temperature Sensors

    Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

    Your Benefits

    • Select Pt 100 or Pt 1000, depending on measuring range and accuracy required.
    • Sturdy design with dimensions of a standard pH sensor; the sensor element is integrated in a chemically inert glass sleeve.
    • Easily installed in a similar way to standard pH sensors with a PG 13.5 thread in existing fittings.
    • Transmitter with display/operation and without display/operation for transmission/conversion of the primary signal into a 4-20 mA signal and for transmission to a central control unit (PLC).

    Technical Details

    • Type Pt 100: for wide range measurements and with the controllers D1C, DAC and DULCOMARIN 3
    • Type Pt 1000: for high resolution with transmitter DMT and controllers DAC and DULCOMARIN 3

    Field of Application

    • Temperature measurement is universally used either to directly measure the temperature or for temperature compensation.

    Temperature

    32…212 °F (0…100 °C)

    Max. pressure

    145 psi

    Thread

    PG 13.5

    Electrical Connection

    SN6

    Typical applications

    Temperature measurement and pH temperature correction.

    Order no.

    Pt 100-SE temperature sensor

    305063

    Pt 1000-SE temperature sensor

    1002856

    Downloads for DULCOTEST temperature sensors

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)
    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Temperature measurement with the reliable DULCOTEST sensors

    Temperature measurement can take place separately or as a correction variable for other measured parameters.

    Temperature measurement is used universally, either to directly measure the temperature or for temperature compensation when measuring the following parameters:

    • pH
    • Fluoride
    • Conductivity
    • Chlorine dioxide
    • Hydrogen peroxide

    Features and Benefits

    • Select Pt 100 or Pt 1000, depending on measuring range and accuracy required.
    • Sturdy design with dimensions of a standard pH sensor; the sensor element is integrated in a chemically inert glass sleeve.
    • Easily installed in a similar way to standard pH sensors with a PG 13.5 thread in existing fittings.
    • Transmitter with display/operation and without display/operation for transmission/conversion of the primary signal into a 4-20 mA signal and for transmission to a central control unit (PLC).

    Application

    Technical Data

    Downloads

    Find local ProMinent representative

    Contact us

    ProMinent Fluid Controls, Inc.


    sales-us@prominent.com

    +1 412-787-2484   
    sales-us@prominent.com Send request    

    »We are looking forward to your enquiry.«

    +1 412-787-2484 

    Matching Products

    DULCOTEST sensors for chlorine dioxide

    Graduated measuring ranges 0.01 – 10 mg/l

    Chlorine dioxide measurement with DULCOTEST sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.

    more

    DULCOTEST pH sensors

    Graduated pH measuring ranges 0 – 14

    pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

    more

    DULCOTEST sensors for fluoride

    Graduated measuring ranges 0.05 – 100 mg/l

    Accurate measurement of fluoride with DULCOTEST sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

    more

    DULCOTEST sensors for hydrogen peroxide

    Graduated measuring ranges 0.2 – 2,000 mg/l, special measuring ranges up to 100,000 mg/l

    Hydrogen peroxide measurement with DULCOTEST sensors: Efficient and reliable determination of the concentration of hydrogen peroxide - can be used in a wide range of applications.

    more

    Controller DULCOMETER diaLog DACb

    The DULCOMETER DACb controller uses intelligent controller functions to close the control circuit between ProMinent DULCOTEST sensors and ProMinent metering pumps.

    more

    DULCOMETER Controllers

    The DULCOMETER Type D1Cb is suitable for applications in drinking water, wastewater, and cooling water treatment. The single channel measuring and control unit D1Cb is equipped for all-important measured variables for basic applications in water treatment and with an error and calibration logbook.

    more

    Measuring and control device DULCOMETER Compact

    The measuring and control device DULCOMETER Compact for pH and redox measured variables is equipped with the standard functions for use in water treatment plants, allowing the operator to switch between the measured variables pH and redox, and between P and PID control characteristics.

    more

    DULCOTEST sensors for conductivity

    Graduated measuring ranges 0.01 µS/cm – 2,000 mS/cm

    Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

    more

    Case studies for this product

    +1 412-787-2484
    Request
    Newsletter
    Call
    Request
    Newsletter