Suggestions

Cooling Water Treatment in Energy Generation

No biofilm, no bacteria, no dangerous by-products

ProMinent metering pumps allow you to keep your cool at all times as you no longer need to concern yourself with the cooling process. Alternative biocides reliably prevent deposits.

Requirements - Cooling Water Treatment in Energy Generation

 

ProMinent uses alternative biocides, and there is a good reason for this: They not only prevent (microbiological) deposits and the formation of legionella in the cooling circuit, but also generate totally safe, if any, by-products from the reaction. The cooling water is therefore always ideally conditioned and disinfected - with no harm to the environment. Instead of traditional biocides with limited effectiveness, our alternative active substances, such as chlorine dioxide Chlorine dioxide is an exceptionally reactive gas, which is not stored due to its instability ... more in the glossary and ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary, are well metered and used in small volumes for impressive results.

Downloads for Cooling Water Treatment in Energy Generation

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by Document type
Load more matches ...
No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

 

ProMinent uses alternative biocides, and there is a good reason for this: They not only prevent (microbiological) deposits and the formation of legionella in the cooling circuit, but also generate totally safe, if any, by-products from the reaction. The cooling water is therefore always ideally conditioned and disinfected - with no harm to the environment. Instead of traditional biocides with limited effectiveness, our alternative active substances, such as chlorine dioxide Chlorine dioxide is an exceptionally reactive gas, which is not stored due to its instability ... more in the glossary and ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary, are well metered and used in small volumes for impressive results.

Downloads

Suitable products - Cooling Water Treatment in Energy Generation

The ProMinent beta is a microprocessor-based diaphragm solenoid metering pump capable of flows from 0.16 to 8.45 gph (0.59 to 32 l/h) and pressures to 363 psi (25 bar).

more

The gamma/ XL is a smart, connectible solenoid-driven metering pump that is setting new standards in terms of productivity, reliability and cost-effectiveness.

more

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

more

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

more

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

The measuring and control device DULCOMETER Compact for pH and redox measured variables is equipped with the standard functions for use in water treatment plants, allowing the operator to switch between the measured variables pH and redox, and between P and PID control characteristics.

more

Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

more

Chlorine dioxide system for the metering of chlorine dioxide with diluted starting chemicals. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDVd can be easily and safely integrated into any water treatment process.

more

Chlorine dioxide system for the metering of chlorine dioxide with concentrated starting chemicals. The proven safety concept protects people and the environment. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDKd can be easily and safely integrated into any water treatment process.

more

The AEGIS II provides reliable control and offers the most flexible communication options to optimize efficiency and profitability for all your cooling, boiler, and wastewater or disinfection applications.

more

The DULCOMETER DACb controller uses intelligent controller functions to close the control circuit between ProMinent DULCOTEST sensors and ProMinent metering pumps.

more

The DULCOMETER diaLog X is a programmable controller used in a variety of water treatment applications to control metering pumps, valves, motors and other components to provide full automation of your chemical feed system.

more

The DULCOFLEX (DFXa) is an intelligent peristaltic metering pump that is valve-free and has the accuracy of a diaphragm pump. Applications include gaseous, highly viscous, abrasive, shear-sensitive and chemically aggressive fluids.

more

With DULCONNEX API, you can access your data on request from the DULCONNEX Cloud. Use this for integration into existing process control systems, SCADA, mobile or online apps as well as MES or share data with other digital solutions.

more

The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eXcellent ingenuity! With integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X is ideal for all metering work involving liquid media.

more

Monitoring and treatment of cooling water with DULCODOS Cooling Water–the compact measuring and control system specially designed for the treatment of cooling water in evaporation cooling systems and wet separators.

more

Introducing flexible programming with ProMinent's SlimFlex 5 Built-in WiFi Hotspot. Enhanced, responsive browser views for smart phones and tablets makes programming fast and easy!

more

Find local ProMinent representative

Contact us

»We are looking forward to your enquiry.«

+1 412-787-2484 

News and Events